Abstract:This study presents the experimental investigation on the cavity regime and the corresponding geometric characteristic of ventilated partial cavitation (VPC). Experiments are conducted in the high-speed water tunnel at Saint Anthony Falls Laboratory. A backward-facing cavitator mounted on the ceiling of test section is used to generate the VPC. The flow filed and the dynamic motion of VPC are captured by the imaging system under varying water speeds and ventilation rates. Four distinct cavity regimes are classified, referred to as foamy cavity (FC), transition cavity (TC), open cavity (OC) and two-branch cavity (TBC). The distribution of these cavity regimes over Froude number (Fr) and ventilation coefficient (C-Qs) is summarized in a regime map with FC and TBC occupying the majority portion of the map. More importantly, the C-Qs - Fr curves demarcating neighboring cavity regimes are revealed satisfying a clear linear relation for FC-TC and a quadratic relation for TC-OC and OC-TBC when Fr is subtracted with a constant corresponding to the inception condition of the cavity regime. Such trends are attributed to the two gas entrainment mechanisms present in VPC, referred to as recirculating vortex entrainment and cavity closure entrainment. Moreover, the geometric characteristic of VPC characterized by the cavity length is examined. With increasing ventilation at fixed Fr, the cavity length grows linearly in OC regime and remains unchanged in TBC regime. The maximum cavity length of OC is found to be within around 7 times of cavitator height. With increasing Fr at fixed ventilation, the cavity length first grows proportional to Fr-2 in TBC regime but drops sharply with a small increase of Fr when the cavity transitions from TBC to OC. At fixed Fr, the cavity underpressure rises to maximum (minimum sigma(c)) and stays unchanged in TBC upon increasing ventilation. As a result, in TBC, the cavity length is shown to satisfy a power law relation with respect to Fr or sigma(c), while in OC, the cavity length is influenced by the interplay among C-Qs, sigma(c) and Fr with no clear trend observed. (C) 2019 Elsevier Ltd. All rights reserved.

A Characterization Method for Cavitation Erosion Incubation Period

Experimental Study and Analysis on Incipient Stage of Cavitation Erosion

Numerical Research on Kerf Characteristics of Abrasive Waterjet Machining Based on the SPH-DEM-FEM Approach

Experimental and numerical investigations on development of cavitation erosion pits on solid surface

An Improved Eulerian-Lagrangian Method Combined with Ductile Material Model for Cavitation Erosion Assessment

A Study on Surface Topography in Cavitation Erosion Tests of AlSi10Mg

An intelligent detecting approach of incipient cavitation based on fast kurtogram

Cavitation Monitoring System Based on Surface of Critical Cavitation Coefficient

Damages on Steel Surface at the Incubation Stage of the Vibration Cavitation Erosion in Water

Numerical Prediction of Cavitation Erosion Risk Based on a New Erosion Indicator

Cavitation Characterization of Fluid Machinery Based on Cyclostationary Analysis: Part 2-Cavity Development Evaluation by Modulation Intensity

Study on prediction model of cavitation erosion incubation period of duplex stainless steel surfacing layer in a benign medium

Experimental Investigation of Ventilated Partial Cavitation

On Mechanism of Cavitation Erosion of Rough Surface

The Effect of Water Quality on Tip Vortex Cavitation Inception

An Adaptive Autogram Approach Based on a CFAR Detector for Incipient Cavitation Detection.

Study of the Mechanism of Cavitation in Inner-Hole Rotating Cavitators

Experimental Study of Cavitation Erosion Damage Affected by Microparticles

Evaluation of a new cavitation erosion metric based on fluid-solid energy transfer in channel flow simulations

Key Factors to Induce Cavitation-Erosion

Affected Zone Generated Around the Erosion Pit on Carbon Steel Surface at the Incipient Stage of Vibration Cavitation