Abstract:Tin (Sn) crystal growth on Sn-based anodes in lithium ion batteries is hazardous for reasons such as possible short-circuit failure by Sn whiskers and Sn-catalyzed electrolyte decomposition, but the growth mechanism of Sn crystals during battery cycling is not clear. Here we report different growth mechanisms of Sn crystal during the lithiation and delithiation processes of SnO(2) nanowires revealed by in situ transmission electron microscopy (TEM). Large spherical Sn nanoparticles with sizes of 20-200nm grew instantaneously upon lithiation of a single-crystalline SnO(2) nanowire at large current density (j>20A/cm(2)), which suppressed formation of the Li(x)Sn alloy but promoted agglomeration of Sn atoms. Control experiments of Joule-heating (j≈2400A/cm(2)) the pristine SnO(2) nanowires resulted in melting of the SnO(2) nanowires but not Sn particle growth, indicating that the abnormal Sn particle growth was induced by both chemical reduction (i.e., breaking the SnO(2) lattice to produce Sn atoms) and agglomeration of the Sn atoms assisted by Joule heating. Intriguingly, Sn crystals grew out of the nanowire surface via a different "squeeze-out" mechanism during delithiation of the lithiated SnO(2) nanowires coated with an ultra-thin solid electrolyte LiAlSiO(x) layer. It is attributed to the negative stress gradient generated by the fast Li extraction in the surface region through the Li(+)-conducting LiAlSiO(x) layer. Our previous studies showed that Sn precipitation does not occur in the carbon-coated SnO(2) nanowires, highlighting the effect of nanoengineering on tailoring the electrochemical reaction kinetics to suppress the hazardous Sn whiskers or nanoparticles formation in a lithium ion battery.

Sn Nanowires Self-Grown on the Immiscible Sn-Ai Alloys and Their Electrochemical Properties As Li-ion Battery Anode

Microstructure and Electrochemical Performance of Thin Film Anodes for Lithium Ion Batteries in Immiscible Al–Sn System

Direct Electrodeposition of Ionic Liquid-Based Template-Free SnCo Alloy Nanowires As an Anode for Li-ion Batteries

Direct Growth of Ni2Si Nanowire Array Electrodes for High-performance Reversible Lithium-ion Batteries

Investigation of Immiscible Alloy System of Al–Sn Thin Films As Anodes for Lithium Ion Batteries

Nanocone-arrays supported tin-based anode materials for lithium-ion battery

FABRICATION OF Sn-Ni ALLOY NANO-ARRAY AND ITS CHARGE/DISCHARGE PERFORMANCE

Flexible Sns Nanobelts: Facile Synthesis, Formation Mechanism and Application in Li-Ion Batteries

Copper nanowall array grown on bulk Fe–Co–Ni alloy substrate at room temperature as lithium-ion battery current collector

Direct Observation of Sn Crystal Growth During the Lithiation and Delithiation Processes of SnO2 Nanowires

Mechanical Analysis and in Situ Structural and Morphological Evaluation of Ni–Sn Alloy Anodes for Li Ion Batteries

High-performance Sn–Ni Alloy Nanorod Electrodes Prepared by Electrodeposition for Lithium Ion Rechargeable Batteries

Realizing Ultrathin LiSn Alloy Anode by Tuning the Wettability of Molten Li for High-Energy-Density Batteries

Polycrystalline SnO2 nanowires coated with amorphous carbon nanotube as anode material for lithium ion batteries

SnSb Alloy Nanoparticles Embedded in N-doped Porous Carbon Nanofibers As a High-Capacity Anode Material for Lithium-Ion Batteries

Local Confinement and Alloy/dealloy Activation of Sn–Cu Nanoarrays for High-Performance Lithium-Ion Battery

Growth of Sno2 Nanosheet Arrays on Various Conductive Substrates As Integrated Electrodes for Lithium-Ion Batteries

Electrodeposition and Characterization of Assembly of Sn on Cu Nanorods for Li-ion Microbattery Application

Fabrication of Sn-Ni Alloy Film Anode for Li-ion Batteries by Electrochemical Deposition

Characterization of SnO2 Nanowires As an Anode Material for Li-ion Batteries

A lithiation/delithiation mechanism of monodispersed MSn5 (M = Fe, Co and FeCo) nanospheres