Abstract:We demonstrate mirror-finished superhydrophobic aluminum surfaces fabricated via the formation of anodic alumina nanofibers and subsequent modification with self-assembled monolayers (SAMs). High-density anodic alumina nanofibers were formed on the aluminum surface via anodizing in a pyrophosphoric acid solution. The alumina nanofibers became tangled and bundled by further anodizing at low temperature because of their own weight, and the aluminum surface was completely covered by the long falling nanofibers. The nanofiber-covered aluminum surface exhibited superhydrophilic behavior, with a contact angle measuring less than 10°. As the nanofiber-covered aluminum surface was modified with n-alkylphosphonic acid SAMs, the water contact angle drastically shifted to superhydrophobicity, measuring more than 150°. The contact angle increased with the applied voltage during pyrophosphoric acid anodizing, the anodizing time, and the number of carbon atoms contained in the SAM molecules modified on the alumina nanofibers. By optimizing the anodizing and SAM-modification conditions, superhydrophobic behavior could be achieved with only a brief pyrophosphoric acid anodizing period of 3 min and subsequent simple immersion in SAM solutions. The superhydrophobic aluminum surface exhibited a high reflectance, measuring approximately 99% across most of the visible spectrum, similar to that of an electropolished aluminum surface. Therefore, our mirror-finished superhydrophobic aluminum surface based on anodic alumina nanofibers and SAMs can be used as a reflective mirror in various optical applications such as concentrated solar power systems.

Superhydrophobic Property of the Perpendicular Nanosheet Film by Hot Water Treatment of the Metal Aluminum

Superhydrophobic poly(vinylidene fluoride) film fabricated by alkali treatment enhancing chemical bath deposition

Super-hydrophobic and Self-cleaning PVDF Film Fabricated by Chemical Bath Deposition

Fabrication of Superhydrophobic Surface with Different Metal Films on Aluminum Alloy

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

A Facile Cost-Effective Method for Preparing Superhydrophobic Self-Cleaning Silica Nanoparticles Coating on Al Substrate

Electrochemical and mechanical properties of superhydrophobic aluminum substrates modified with nano-silica and fluorosilane

Robust superhydrophobic film on aluminum alloy prepared with TiO 2 /SiO 2 -silane composite film for efficient self-cleaning, anti-corrosion and anti-icing

Wettability regulation from superhydrophilic to superhydrophobic via nanosecond laser ablation

A Superhydrophobic Self‐Cleaning and Anti‐Icing Aluminum Sheet Fabricated by Alkaline Solution

Durable Superhydrophobic Aluminum Surfaces against Immersion and Hot Steam Impact: A Comparative Evaluation of Different Hydrophobization Methods and Coatings

Superhydrophobic Modification of Atomic Layer Deposition Antireflection Aluminum Oxide Film: A Simple Evaporative Coating Technique

Robust, Superhydrophobic Aluminum Fins with Excellent Mechanical Durability and Self-Cleaning Ability

Optimal conditions for the fabrication of alumina superhydrophobic surfaces via anodization, and its self-cleaning, anti-icing, and cold-resistance capabilities

Fabrication of Super-Hydrophobic Surfaces on Aluminum Alloy Substrates by RF-sputtered Polytetrafluoroethylene Coatings

Fabrication of superhydrophobic aluminum alloy surfaces by nickel and phosphorus chemical deposition

Mirror-finished superhydrophobic aluminum surfaces modified by anodic alumina nanofibers and self-assembled monolayers

Superamphiphobic triple-scale micro-/nanostructured aluminum surfaces with self-cleaning and anti-icing properties

Micropatterned Amorphous Zr-Based Alloys Coated with Silica Nanoparticles as Superhydrophobic Surfaces against Abrasion

Fabrication of Superhydrophobic Surface on Anodized Aluminum Through a Wet-Chemical Route

PDMS-Based Hierarchical Superhydrophobic Fabric Coating Fabricated by Thermal Treatment and Electrostatic Flocking Technology