Abstract:In this study, we develop an efficient approach to fabricate superhydrophobic aluminum alloy samples. The superhydrophobic aluminum alloy sample is prepared by combining high-speed wire electrical discharge machining, a short-time chemical etching method, with a modification treatment. The prepared superhydrophobic aluminum sample possesses a contact angle of 158.6 ± 1.3° and a sliding angle of below 1°. The introduction of chemical etching can shorten the preparation time from 20 to 8 h. The prepared superhydrophobic aluminum alloy sample is durable enough to endure the harsh conditions to which some aluminum alloy parts are subjected. Its excellent anti-icing ability is confirmed by the freezing delay test and low-temperature durability test under overcooled conditions. In addition, the prepared superhydrophobic aluminum alloy sample shows superior thermostability and high-temperature durability in the range of 180∼240 °C. Moreover, the prepared superhydrophobic aluminum alloy sample exhibits outstanding mechanical durability that can endure abrasion by 1000-grit sandpaper at 20 kPa for 260 cm. It also can withstand 11 vertical impacts by 200 g weight dropped from 12 cm with the weight falling on the sample at a rate of ∼15.50 cm/s. The introduction of the chemical etching greatly shortens the preparation time and the as-prepared superhydrophobic aluminum alloy sample exhibited excellent durability, which may widen the application range of superhydrophobic aluminum alloys.

Optimal conditions for the fabrication of alumina superhydrophobic surfaces via anodization, and its self-cleaning, anti-icing, and cold-resistance capabilities

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

Fabrication and Characterization of Superhydrophobic Surfaces on Aluminum Alloy Substrates

Fabrication of a Highly Stable Superhydrophobic Surface with Dual-Scale Structure and Its Antifrosting Properties

Superamphiphobic triple-scale micro-/nanostructured aluminum surfaces with self-cleaning and anti-icing properties

Robust superhydrophobic surface on Al substrate with durability, corrosion resistance and ice-phobicity

A Superhydrophobic Self‐Cleaning and Anti‐Icing Aluminum Sheet Fabricated by Alkaline Solution

A simple strategy towards construction of fluorine-free superhydrophobic aluminum alloy surfaces: self-cleaning, anti-corrosion and anti-frost

Robust superhydrophobic aluminum alloy surfaces with anti-icing ability, thermostability, and mechanical durability

Fabrication of Superhydrophobic Surface on Anodized Aluminum Through a Wet-Chemical Route

Fabrication of a micro-nanostructured superhydrophobic aluminum surface with excellent corrosion resistance and anti-icing performance

Surface Super-Hydrophobicity of Aluminum Alloy and its Corrosion and Anti-Icing Properties

A simple fabrication method for mechanically robust superhydrophobic surface by hierarchical aluminum hydroxide structures

Robust and Chemically Stable Superhydrophobic Aluminum-Alloy Surface with Enhanced Corrosion-Resistance Properties

A Facile Cost-Effective Method for Preparing Superhydrophobic Self-Cleaning Silica Nanoparticles Coating on Al Substrate

Robust superhydrophobic film on aluminum alloy prepared with TiO 2 /SiO 2 -silane composite film for efficient self-cleaning, anti-corrosion and anti-icing

Fabrication of Superhydrophobic AA5052 Aluminum Alloy Surface with Improved Corrosion Resistance and Self Cleaning Property

Controllable Construction and Corrosion Resistance Mechanism of Durable Superhydrophobic Micro-Nano Structure on Aluminum Alloy Surface

Facile fabrication of a robust and corrosion resistant superhydrophobic aluminum alloy surface by a novel method

Fabrication of superhydrophobic aluminum alloy surfaces by nickel and phosphorus chemical deposition