Abstract:Anti-icing/icephobic coatings, typically applied in the form of surface functional materials, are considered to be an ideal selection to solve the icing issues faced by daily life and industrial production. However, the applications of anti-icing coatings are greatly limited by the two main challenges: bonding strength with substrates and stability of the high anti-icing performance. Here, we designed and fabricated a kind of high-performance superhydrophobic fluorinated silica (F-SiO2)@polydimethylsiloxane coatings and further emphasized the improvement of the bonding strength with substrates and the maintenance of high anti-icing performance. The resultant coatings exhibited excellent water repellency with a contact angle up to 155.3° and a very short contact time (∼10.2 ms) of impact droplets. At low temperatures, the coming droplets still rapidly rebounded off the coating surface, and the superhydrophobic coatings displayed a more than 50-fold increase of freezing time comparing with bare aluminum. The ice adhesion strength on the coatings was only 26.3 kPa, which was far less than that (821.9 kPa) of bare aluminum. Furthermore, the nanoporous structures constructed by anodic oxidation could tremendously enhance the bonding strength of the coatings with the substrate, which was evaluated through a standard method (ASTM D3359). The anti-icing properties still retained high stability under the conditions of 30 icing/deicing cycles, soaking, and scouring of acid solution (pH = 5.6). This work can effectively push the anti-icing coatings toward a real-world application.

A Superhydrophobic Self‐Cleaning and Anti‐Icing Aluminum Sheet Fabricated by Alkaline Solution

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

Superamphiphobic triple-scale micro-/nanostructured aluminum surfaces with self-cleaning and anti-icing properties

Robust superhydrophobic aluminum alloy surfaces with anti-icing ability, thermostability, and mechanical durability

Optimal conditions for the fabrication of alumina superhydrophobic surfaces via anodization, and its self-cleaning, anti-icing, and cold-resistance capabilities

Surface Super-Hydrophobicity of Aluminum Alloy and its Corrosion and Anti-Icing Properties

Fabrication of a Highly Stable Superhydrophobic Surface with Dual-Scale Structure and Its Antifrosting Properties

Fabrication and Characterization of Superhydrophobic Surfaces on Aluminum Alloy Substrates

A simple strategy towards construction of fluorine-free superhydrophobic aluminum alloy surfaces: self-cleaning, anti-corrosion and anti-frost

Robust superhydrophobic film on aluminum alloy prepared with TiO 2 /SiO 2 -silane composite film for efficient self-cleaning, anti-corrosion and anti-icing

Efficient and Controllable Preparation of Super-Hydrophobic Alumina-Based Ceramics Coating on Aviation Al-Li Alloy Surface for Corrosion Resistance and Anti-Icing Behavior

A Feasibility Study of Superhydrophobic Coating on Al6061 for Airplane Anti-icing Applications

Spraying Fabrication of Durable and Transparent Coatings for Anti-Icing Application: Dynamic Water Repellency, Icing Delay, and Ice Adhesion

Fabrication of an Anti-Icing Aluminum Alloy Surface by Combining Wet Etching and Laser Machining

Icephobicity Studies of Superhydrophobic Coating on Aluminium

Fabrication of Superhydrophobic AA5052 Aluminum Alloy Surface with Improved Corrosion Resistance and Self Cleaning Property

Fabrication of a micro-nanostructured superhydrophobic aluminum surface with excellent corrosion resistance and anti-icing performance

Robust superhydrophobic surface on Al substrate with durability, corrosion resistance and ice-phobicity

Superhydrophobic aluminum alloy surface with excellent universality, corrosion resistance, and antifouling performance prepared without prepolishing

A Facile Cost-Effective Method for Preparing Superhydrophobic Self-Cleaning Silica Nanoparticles Coating on Al Substrate

Fabrication of Super-Hydrophobic Surfaces on Aluminum Alloy Substrates by RF-sputtered Polytetrafluoroethylene Coatings