Abstract:In order to avoid the high cycle fatigue which leads to the failure of turbine blades, friction structural damping has been widely used in turbine blade designs to reduce vibratory stresses by energy dissipation. A method is developed here to analyze the influence of friction structural damping on the vibration characteristics of turbine blades. Vibratory responses of a long steam turbine blade with shroud and snubber are studied. Finite element contact analysis of the steam turbine blades which are modeled in 3-D solid elements is conducted to obtain the normal contact force on the shroud contact surface and snubber contact surface of adjacent blades under five different rotational speeds (2100rpm, 2200rpm, 2413rpm, 2600rpm and 3000rpm). A rig for the tests of non-rotating turbine blade with friction damping structure is built. The normal contact forces of the shroud and snubber are applied to the blade according to numerical results. The response curves and modal damping ratios of the blade under different normal contact forces, which each one is related to a different rotational speed, are obtained. The experimental results show that with increases in rotational speed, modal damping ratio of the blade experiences an increasing period followed by a decreasing period while the resonance amplitude decreases first and then increases when there is only shroud contact. The effects are similar when there are both shroud and snubber contact. The modal damping ratio of the blade is basically identical with that of the uncoupled blade for the rotational speed above 2600rpm. For this range of rotational speed, the resonance frequency increases with the increase of rotational speed, and the changes of the resonance frequency are very trivial.

The Dynamic Modeling and Numerical Simulation of Long Turbine Blades Group That Has the Dry Friction Damping Structure

Dynamic Response of A Simplified Turbine Blade Model with Under-Platform Dry Friction Dampers Considering Normal Load Variation

NUMERICAL MODEL AND OPTIMIZATION FOR DYNAMIC CHARACTERISTIC OF LONG BLADE WITH FRICTION DAMPER

Dynamic Response Analysis of Blades with Damping Structures of Shroud and Snubber

Investigation of Vibration Characteristics for Dry Friction Damped Blades with High-fidelity Finite Element Model

Damped vibration characteristics of blades with tips of an aero-engine

Numerical Model And Optimization For Dynamic Characteristic Of Damping Blade

An Effective Numerical Method for Calculating Nonlinear Dynamics of Structures with Dry Friction: Application to Predict the Vibration Response of Blades with Underplatform Dampers

ONE NEW METHOD FOR ANALYSING SYSTEMS WITH DRY FRICTION DAMPING

Method for Analyzing Two-Dimensional Coupled Vibration of Turbine Blade with Dry Friction Platform Damper

Optimal Design for Damper of Long Blade in Steam Turbine Based on Dynamic Analysis

NUMERICAL INVESTIGATIONS OF THE LONG BLADE PERFORMANCE USING RANS SOLUTION AND FEA METHOD COUPLED WITH ONE-WAY AND TWO-WAY FLUID-STRUCTURE INTERACTION MODELS

Dynamic Analysis of Integrally Shrouded Group Blades with Rubbing and Impact

Two-dimensional micro slip model for analyzing coupled vibration of turbine blade with dry friction damper

NUMERICAL MODEL FOR VIBRATION CHARACTERISTIC OF STEAM TURBINE BLADE WITH DAMPED SHROUD

Experimental Friction Damping Characteristic Of A Steam Turbine Blade Coupled By Shroud And Snubber At Standstill Set-Up

Nonlinear Dynamic Analysis of Shrouded Turbine Blade of Aero-engine Subjected to Combination Effect of Impact and Friction

The Vibration Characteristics of Steam Turbine Blades with New Friction Damping Structures

Dynamic Characteristics of Flexible Shrouded Blades in Aero-engines

Investigations on Unsteady Flow Excitation and Mechanical Performance of Last Turbine Stage Long Blade Using Fluid-Structure Interaction Method

A Survey of Aero-Engine Blade Modeling and Dynamic Characteristics Analyses