Abstract:Recent experiments have demonstrated the fabrication of nickel nanolaminated structures with low-angle grain boundaries and that these nanolaminated structures exhibit an ultrahigh hardness of 6.4 GPa and excellent thermal stability. However, the detailed microstructure of the low-angle grain boundary in these nanolaminated structures and plastic deformation mechanisms underlying their ultrahigh hardness have remained elusive to date. Thus, we performed a series of large-scale atomistic simulations to explore the microstructures, thermal stability and energies of the low-angle grain boundary in nanolaminated nickel and to further mimic the plastic deformation of nanolaminated nanopillars. First, we examined the thermal stability of low-angle grain boundaries in nanolaminated structures with three typical textures observed in previous experiments, and we found that the {111}<110>-textured nanolaminated structure is the most stable and has a critical temperature of approximately 750 K for stability. The low-angle grain boundary in such nanolaminated structures consists of a periodic arrangement of three types of dislocations with Burgers vectors of 1/2[101], 1/3[11¯1] and 1/6[14¯1]. Our simulations also showed that the grain boundary energy of the low-angle grain boundary with misorientation of 5° is approximately 0.70 J/m2 and that the interaction energy between two low-angle grain boundaries follows a power law as the lamellar thickness, with an exponent of −1.14. We further simulated the uniaxial compression and tension of nanolaminated nanopillars with a texture of {111}<110> and different lamellar thicknesses. The simulation results showed that as the lamellar thickness decreases, both compressive and tensile yield stresses significantly decrease, while their flow stresses slightly increase. The size effect on yield stress is attributed to dislocation escape from the low-angle grain boundary due to some typical reactions of constituent dislocations, while the size effect on flow stress is related to a complex reaction and interaction of high-density dislocations. Our study provides a fundamental understanding of the grain boundary structure and plastic deformation in textured nanolaminated metals, which offers insights for the design of stronger nanolaminated structures.

The influence of grain morphology on indentation deformation characteristic of metallic nano-multilayers

Role of Interfacial Transition Zones in the Fracture of Cu/V Nanolamellar Multilayers

Deformation-induced Interfacial Transition Zone in Cu/V Nanolamellar Multilayers

Coordinated grain boundary deformation governed nanograin annihilation in shear cycling

Nanoindentation Investigation of the Mechanical Behaviors of Nanoscale Ag/Cu Multilayers

Research on Deforming Mechanism of Nanocrystalline Cu Thin Film under Contact Deformation

Co-deformation in Cu–6 Wt.% Ag Nanocomposites

The effect of interface structures on deformation behavior of Cu/Ni multilayer by molecular dynamics

Shear-induced directional grain growth in ag nanocrystalline films under nanoindentation

Influence of plasticity mismatch and porosity on mechanical behavior of nanoscale Ag/W multilayers

Interfacial Structures Governed Plastic Deformation Behaviors in Metallic Multilayers

Influence of interface on deformation compatibility of a heterogeneous Cu/Al nanoscale multilayer

Nanoindentation and nanoscratch behaviors of Ag/Ni multilayers

Morphology and mechanical properties of nanocrystalline Cu/Ag alloy

Progress in Research on the Mechanical Properties of Nanoscale Metallic Multilayers

Deformation Mechanisms Dominated by Decomposition of an Interfacial Misfit Dislocation Network in Ni/Ni3Al Multilayer Structures

Microstructure and Mechanical Properties of Polycrystalline-Ag/Amorphous-Cozrnb Multilayers

Influence of Ag on the Microstructure and Magnetic Properties of Perpendicular Exchange Coupled Composite L1-[FePt-Ag]/[Co/Ni]N Films

Microstructure and mechanical properties of nanoscale Cu/Ni multilayers

The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni

Low-angle Grain Boundary Structures and Size Effects of Nickel Nanolaminated Structures