Abstract:Cellulosic paper products based on sustainable resources are of interest as a replacement for petroleum-based plastics, for example, in packaging applications. Improvements are desired for mechanical performance, recyclability, and possibilities to shape fiber networks into complex geometries. Commercial bleached wood fibers from the kraft process have insufficient mechanical properties for many applications, even with beating and additives. In addition, mechanical properties of paper structures are significantly reduced after recycling. Here, recycling and 3D shaping performance of holocellulose fibers are compared with kraft fibers and investigated in the context of wood fiber tailoring for eco-friendly materials. Holocellulose fibers from wood are prepared by mild peracetic acid delignification for well-preserved nanostructures and hemicellulose content (28 wt %). Paper structures of about 50% porosity are prepared from both types of fibers by vacuum filtration and drying. Mechanical tensile tests are performed, and fracture surfaces are investigated. The effects of recycling on the fiber structure (chemical composition, morphology, and crystallite size in fibers) and mechanical paper properties are reported. 3D-shaping performance is studied using compression molding with a double-curved mold. Holocellulose paper structures showed much better mechanical properties than kraft fiber paper (Young's modulus 10 GPa, ultimate tensile strength 100 MPa), as well as better recycling performance (only 26% decrease in strength after 5 cycles) and 3D formability. The well-preserved cellulose and hemicellulose components are important, as well as the homogeneity of the fiber cell wall nanostructure. This preserves the intrinsic mechanical properties of fibers, reduces hornification effects, and provides strong interfiber adhesion. Furthermore, the water-soluble hemicelluloses present at the cellulose-cellulose interface are able to facilitate recycling and 3D forming.

Study on the Effect of Recycling on Properties of Eucalyptus Kraft Pulp

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Study of Sizing with Anionic Rosin Emulsion of the Recycled Paper Pulp

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Effects of pretreatment on the recycling properties of birch holocellulose paper

Recycling Without Fiber Degradation—Strong Paper Structures for 3D Forming Based on Nanostructurally Tailored Wood Holocellulose Fibers

Effect of surfactants on the cellulosic fiber characteristics during paper recycling

Regioselective oxidation of recycled cellulosic fibres for enhancement in the mechanical strength of resulting papers

Influences of Drying Conditions on Sizing Performance of Recycled OCC Fibers

Effects of Deinking Mode on Pore Structure and Crystallization Property of Recycled Fiber

Supramolecular structure assessment of alkali modified eucalyptus kraft pulp for gentle hygienic fluff pulp applications

Color Removal of Pulp and Paper Mill Wastewater Using Residual Eucalyptus Wood

AN INVESTIGATION OF THE VARIATION OF PORE STRUCTURE IN EUCALYPTUS FIBRE DURING RECYCLING

Eucalyptus Pulp Fibers with In-Situ Precipitated Calcium Carbonate – A 12-Inch Laboratory Paper Machine Study

FIBER CLASSIFICATION, PHYSICAL AND OPTICAL PROPERTIES OF RECYCLED PAPER

Upgrading waste paper by in-situ calcium carbonate formation

Effects of defibration process on the properties of old corrugated container fiber

Effect of Shape and Application Process of Precipitated Calcium Carbonate on Optical and Mechanical Properties of Recycled Paper

The Reinforcing Effect of Waste Corrugated Paper Fiber on Polylactic Acid

Ceibapentandra (L.) Gaertn (Kapok) Seed Fibre as a Recycled Paper Reinforcement Pulp