Abstract:Plastic injection molding is widely used in many industrial applications. Plastic products are mostly used as disposable parts or as portable parts for fast replacements in many devices and machines. However, mass production is always adopted as an ideal method to cover the huge demands and customers’ needs. The problems of warpage due to thermal stresses, non-uniform pressure distribution around cavities, shrinkage, sticking and overall products quality are some of the important challenges. The main objective of this work is to analyze the stress distribution around the cavities during the molding and demolding to avoid their effects on the product quality. Moreover, diagnosing the critical pressure points around and overall the cavity projection area, which is subjected to high pressure will help to determine the optimum pressure distribution and ensure filling all cavities at the same time, which is another significant objective. Computer-aided design (CAD) and CATIA V5R20 are adopted for design and modeling procedures. The computer-aided engineering (CAE) commercial software ABAQUS 6141 has been dedicated as finite element simulation packages for the analysis of this process. Simulation results show that stress distribution over the cavities depends on both pressure and temperature gradient over the contact surfaces and can be considered as the main affecting factor. The acceptable ranges of the cavity stresses were determined according to the following values: the cavity and core region temperature of 55–65 °C, filling time of 10–20 s, ejection pressure 0.85 % of injection pressure, and holding time of 10–15 s. Also, theoretical results reveal that the uniform pressure and temperature distribution can be controlled by adjusting the cavities layout, runner, and gate size. Moreover, the simulation process shows that it is possible to facilitate and identify many difficulties during the process and modify the prototype to evaluate the overall manufacturability before further investing in tooling. Furthermore, it is also concluded that tooling iterations will be minimized according to the design of the selected process

Simulation Analysis on Complicated Injection Molding Product

Integrative Analysis of the Injection Molding Process and Mechanical Behavior of Plastic Part

ANALYSIS OF INJECTION MOLDING OF AUTOMOBILE AIRBAG COVER BASED ON MOLDFLOW

Optimization Analysis and Design with CAE for Injection Mold of Automobile Instr ument

Flow Simulation and Defects Analysis of Injection Molded Parts Based on CAE Technique

Study of injection molding process simulation and mold design of automotive back door panel

The application of injection molding simulation in mold design

Computer Simulation Analysis of Ceramic Powder Injection Molding Process and Molding Defects Formation

ANALYSIS OF FLOW FIELD IN INJECTION MOLDING ABOUT PLASTIC HOUSING OF INTERNAL COMBUSTION TAMPING PICK

Research on the Application of Injection Molding Simulation Technology in Mold Design

Structural analysis of injection mould based on CAD/CAE integration

Moldflow Analysis of Injection in Notebook Battery Cover

The Design and CAE Analysis in Multy-carities Injection Moding Feed System

Simulation of Injection Moulding for AC Contactor Shell Based on Moldflow

Cavity Filling Analysis of Injection Molding Simulation:The Formation of Bubble and Weld Line

Computational Simulation And Experimental Analysis Of The Mold-Filling Process In Mu Pim

Verification and analysis of the injection plastic mold of the computer front panel based on the SolidWorks

Analysis of the main factors affecting mass production in the plastic molding process by using the finite element method

Numerical Simulations of Residual Stresses and Warpage in Injection Molding

3D Modeling in Injection Molding Seat and Optimization of Its Process Parameters

Research on Lightweight Injection Molding (CAE) and Numerical Simulation Calculate of New Energy Vehicle