Abstract:Different kinds of sulfides in diesel fraction were divided into three lumps according to hydrodesulfurization reaction difficulty, and diesel deep hydrodesulfurization reaction process was simulated in three lumped first order hydrodesulfurization kinetic model. In addition, hydrodesulfurization reaction law of different types of sulfide in diesel distillate and reaction characteristics of several different types of diesel deep hydrodesulfurization catalysts were analyzed by using kinetic model simulation method. The results showed that lumped 1 sulfides were reacted completely when hydrodesulfurization yield was 70%,and with the reaction depth increasing, the ratio of lump 3 in unreacted sulfides increased, 80% sulfides in unreacted sulfides was lump 3 sulfides after hydrodesulfurization yield was 98%.Compared to the other two lumped sulfides, the removal of lumped 3 DBT sulfides with space steric effect was the rate controlling step of deep hydrodesulfurization reaction process. The temperature sensitivity to the removal of lumped 3 sulfides was poor. So high pressure and low LHSV were favorable to removal of lumped 3 sulfides. Plot results also showed that thermodynamic balance effect had more obviously influence on catalyst 1. Under the reaction conditions of p(H2)=6.0 MPa, LHSV=1.5 h-1 and using catalyst 1 as catalyst and feed 2 as reaction feed, sulfur content in refined oil had the minimum value when the reaction temperature reached to 370 ℃.Although it did not happen in catalyst 2 and catalyst 3 at the same reaction pressure and higher reaction temperature, catalyst 2 and catalyst 3 showed better reaction activity to lumped 3 sulfides and better temperature sensitivity, so catalyst 2 and catalyst 3 were more suitable for application to commercial deep desulfurization reaction process.

Study on the Deep Hydrodesulfurization of Sulfur-Containing Compound in FCC Diesel on FH-UDS Catalyst

Study on application of catalyst FH-UDS to deep hydrodesulfurization of catalytic cracking diesel fuels

Effects of Ga- and P-modified USY-based NiMoS catalysts on ultra-deep hydrodesulfurization for FCC diesels

Deep hydrodesulfurization of FHUDS-2 catalyst in Zhenhai mixed oil

Effect of catalyst FH-UDS on catalytic cracking diesel fuel hydrodearomatization

Oxidative Desulfurization of FCC Diesel Oil Using Amphiphilic Catalyst Combined with Solvent Extraction

Study on performances of diesel deep hydrodesulfurization catalyst

STUDY ON THE COUNTERCURRENT DEEP HYDRODESULFURIZATION AND HYDRODEAROMATIZATION OF DIESEL FUEL

THE HYDRODESULFURIZATION PATHS OF FCC GASOLINE SULFIDES ON ZSM-5 CATALYST

Establishment of Three Lumped First-order Kinetic Model for Diesel Deep Hydrodesulfurization

Molecular Level Simulation of the Conversion and Distribution of Sulfides in the Fluid Catalytic Cracking and Hydrotreating Processes to Improve the Cleanliness of Gasoline and Diesel

Organic sulfur removal from catalytic diesel oil by hydrodesulfurization combined with biodesulfurization

Hydrodesulfurization of diesel in a slurry reactor

Exploratory Study on Ultrasonic Oxidation Desulfurization of Catalytic Cracking Diesel Oil

Study on hydrodesulfurization of catalytic cracking gasoline on Mo-Co catalyst

Desulfurization of Fluid Catalytic Cracking Gasoline by Extractive Distillation Coupled with Hydrodesulfurization of Heavy Fraction

Progress in Catalyst and Technique of Deep Hydrodesulfurization for Vehicle Fuels

Progress of Catalysts for Deep Hydrodesulfurization of Fuels

Effective Reduction of Hydrogen Consumption in Ultra-Deep Hydrodesulfurization of Diesel: Deep Insights into the Effect of Thermodynamic Limitations During Hydrotreating

Desulphurization of FCC gasoline by N,N-dimethyl formamide extraction

Energy Basics of Catalytic Hydrodesulfurization of Diesel Fuels