Abstract:Mixed eight-node (hexahedron) solid-shell elements based on the standard or partial version of the three-field Hu–Washizu (HW) functionals are developed for Green strain. Three reduced representations of the assumed stress/strain fields are selected. They improve effectiveness, yet retaining good accuracy and convergence properties. At the outset, the standard HW functional and the assumed stress/strain representations of the 3D solid element B8-15P (Weissman in Int J Numer Methods Eng 39:2337–2361, 1996) are used to derive a solid-shell element with 51 parameters. To eliminate locking, the ANS method is applied to the thickness strain (Betsch and Stein in Commun Numer Methods Eng 11:899–909, 1995) and to the transverse shear strain (Dvorkin and Bathe in Eng Comput 1:77–88, 1984). It is a correct element which, however, yields too large displacements for coarse meshes and trapezoidal through-thickness shapes. To improve the above formulation, the -independent reduced representations of the assumed stress/ strain fields are selected and the transformations to Cartesian components are modified. The thickness strain is enhanced by the EAS method. The element with 35 parameters is derived from the standard/enhanced HW functional, but, to further reduce the assumed fields, partial/enhanced HW functionals are constructed from the 3D potential energy by applying the Lagrange multiplier method only to selected strain components. In the element with 27 parameters, this is applied to the constant in-plane strain and to the transverse shear strain while in the element with 19 parameters, to the constant in-plane strain only.Two other modifications are implemented to enhance the behavior of these elements: (A) the skew coordinates are used in the reduced representations of the in-plane stress/strain (Wisniewski and Turska in Int J Numer Methods Eng 90:506–536, 2012), and (B) the Residual Bending Flexibility correction of the transverse shear stiffness (MacNeal in Comput Struct 8(2):175–183, 1978) is adapted. Finally, the performance of the proposed solid-shell HW elements is demonstrated on several linear and non-linear examples for the linear elastic material and the hyper-elastic material. The proposed elements are compared to each other and to the best existing elements of this class.

A new stabilized enhanced assumed strain (EAS) solid-shell element

A stabilized underintegrated enhanced assumed strain solid-shell element for geometrically nonlinear plate/shell analysis

Reduced representations of assumed fields for Hu–Washizu solid-shell element

A New Five-Node Locking-Free Quadrilateral Element Based On Smoothed Fem For Near-Incompressible Linear Elasticity

IMPROVED EAS ELEMENTS

Eight-node incompatible solid-plate element

An explicit formulation of solid-shell element and its application in sheet metal forming processes

A robust finite strain isogeometric solid-beam element

A novel hybrid-stress method using an eight-node solid-shell element for nonlinear thermoelastic analysis of composite laminated thin-walled structures

Explicit Simulation of Roll Forming Process with Eas Solid-Shell Elements

An Improved Crack-Tip Element Treatment for Advanced FEMs

Quadratic solid–shell elements for nonlinear structural analysis and sheet metal forming simulation

An unsymmetric 8‐node hexahedral solid‐shell element with high distortion tolerance: Linear formulations

Stress–displacement stabilized finite element analysis of thin structures using Solid-Shell elements, Part II: Finite strain hyperelasticity

Quasi-consistent efficient meshfree thin shell formulation with naturally stabilized enforced essential boundary conditions

Study Advances in the Elastoplastic Large Deformation Solid Shell Element Models

Explicit Analysis of Sheet Metal Forming Processes Using Solid-Shell Elements

The simulation of sheet metal forming processes via integrating solid-shell element with explicit finite element method

A mixed hexahedral solid‐shell finite element with self‐equilibrated isostatic assumed stresses for geometrically nonlinear problems

An unsymmetric 8-node hexahedral solid-shell element based on ANS and incompatible concepts for thin shell analysis