Abstract:Mixed eight-node (hexahedron) solid-shell elements based on the standard or partial version of the three-field Hu–Washizu (HW) functionals are developed for Green strain. Three reduced representations of the assumed stress/strain fields are selected. They improve effectiveness, yet retaining good accuracy and convergence properties. At the outset, the standard HW functional and the assumed stress/strain representations of the 3D solid element B8-15P (Weissman in Int J Numer Methods Eng 39:2337–2361, 1996) are used to derive a solid-shell element with 51 parameters. To eliminate locking, the ANS method is applied to the thickness strain (Betsch and Stein in Commun Numer Methods Eng 11:899–909, 1995) and to the transverse shear strain (Dvorkin and Bathe in Eng Comput 1:77–88, 1984). It is a correct element which, however, yields too large displacements for coarse meshes and trapezoidal through-thickness shapes. To improve the above formulation, the -independent reduced representations of the assumed stress/ strain fields are selected and the transformations to Cartesian components are modified. The thickness strain is enhanced by the EAS method. The element with 35 parameters is derived from the standard/enhanced HW functional, but, to further reduce the assumed fields, partial/enhanced HW functionals are constructed from the 3D potential energy by applying the Lagrange multiplier method only to selected strain components. In the element with 27 parameters, this is applied to the constant in-plane strain and to the transverse shear strain while in the element with 19 parameters, to the constant in-plane strain only.Two other modifications are implemented to enhance the behavior of these elements: (A) the skew coordinates are used in the reduced representations of the in-plane stress/strain (Wisniewski and Turska in Int J Numer Methods Eng 90:506–536, 2012), and (B) the Residual Bending Flexibility correction of the transverse shear stiffness (MacNeal in Comput Struct 8(2):175–183, 1978) is adapted. Finally, the performance of the proposed solid-shell HW elements is demonstrated on several linear and non-linear examples for the linear elastic material and the hyper-elastic material. The proposed elements are compared to each other and to the best existing elements of this class.

Quasi-consistent efficient meshfree thin shell formulation with naturally stabilized enforced essential boundary conditions

A meshless method using wavelets

A stabilized underintegrated enhanced assumed strain solid-shell element for geometrically nonlinear plate/shell analysis

A new stabilized enhanced assumed strain (EAS) solid-shell element

A Novel Volume Constrained Smoothing Method for Meshes

A compatible mixed finite element method for large deformation analysis of two‐dimensional compressible solids in spatial configuration

Framework of Physically Consistent Homogenization and Multiscale Modeling of Shell Structures

A New Method to Treat Essential Boundary Conditions for the Meshless Method

An efficient solid shell material point method for large deformation of thin structures

Stress–displacement stabilized finite element analysis of thin structures using Solid-Shell elements, Part II: Finite strain hyperelasticity

A consistency-driven particle-advection formulation for weakly-compressible smoothed particle hydrodynamics

Imposition Of Essential Boundary Conditions By Displacement Constraint Equations In Meshless Methods

Stress-hybrid virtual element method on quadrilateral meshes for compressible and nearly-incompressible linear elasticity

A hybrid extended finite element/level set method for modeling equilibrium shapes of nano-inhomogeneities

A mixed constant-stress smoothed-strain element with a cubic bubble function for elastoplastic analysis using second-order cone programming

An SPH formulation for general plate and shell structures with finite deformation and large rotation

Weak Form Quadrature Shell Elements Based on Absolute Nodal Coordinate Formulation

Reduced representations of assumed fields for Hu–Washizu solid-shell element

A Quadrilateral Thin Shell Element Based on Area Co‐ordinate for Explicit Dynamic Analysis

A Weak Form Quadrature Element Formulation for Geometrically Exact Thin Shell Analysis

A FE2 shell model with periodic boundary conditions for thin and thick shells