Effects of heat-treatment temperature and holding time on the microstructure and mechanical properties of lithium disilicate glass-ceramics
Yangshan Sun,Liyun Ma,Jiedong Cui,Liang Feng,Zhengyi Zhang,Yong Yang,Na Han,Wang Zhang,Qi Sun,Xin Cao,Tianhe Wang
DOI: https://doi.org/10.1016/j.jnoncrysol.2020.120502
2021-02-01
Abstract:<p>Lithium disilicate (Li<sub>2</sub>Si<sub>2</sub>O<sub>5</sub>) glass-ceramics in the SiO<sub>2</sub>-Li<sub>2</sub>O-MgO-Al<sub>2</sub>O<sub>3</sub>-Rb<sub>2</sub>O-P<sub>2</sub>O<sub>5</sub> glass system was prepared by a three-stage heat treatment. The microstructure and mechanical properties of the glass-ceramics were investigated. DSC results showed that the crystallization temperatures of lithium metasilicate (Li<sub>2</sub>SiO<sub>3</sub>) and Li<sub>2</sub>Si<sub>2</sub>O<sub>5</sub> are about 619°C and 789°C respectively. XRD revealed that the main phase of the glass-ceramics is Li<sub>2</sub>Si<sub>2</sub>O<sub>5</sub> with a small amount of Li<sub>2</sub>SiO<sub>3</sub>, Li<sub>3</sub>PO<sub>4</sub> and coesite (SiO<sub>2</sub>) phases. Characterized by SEM, Li<sub>2</sub>Si<sub>2</sub>O<sub>5</sub> crystals transformed from spherical to rod-shaped with the temperature rising from 770°C and 850°C in the third stage. The nucleation and crystallization experience of the first two heat treatment stages is crucial to Li<sub>2</sub>Si<sub>2</sub>O<sub>5</sub> glass-ceramics with good mechanical properties. After the three-stage heat treatment of 530°C/2 h, 620°C/0.5 h and 820°C/1 h, the glass-ceramics with a large number of round-shaped Li<sub>2</sub>Si<sub>2</sub>O<sub>5</sub> crystals have a high strength of 325 ± 47 MPa.</p>
materials science, multidisciplinary, ceramics