Abstract:Poly(vinyl chloride) (PVC)-based composites were prepared by blending PVC with nano-SiO2 particles, which were treated with dimethyl dichlorosilane (DMCS), γ-methylacryloxypropyl trimethoxy silane (KH570). The dispersion and interfacial compatibility of nano-SiO2 particles in PVC matrix was characterized by SEM, which indicated that DDS had a better dispersion and compatibility than UTS but worse than KHS. The mechanical properties, processability and effective interfacial interaction of nano-SiO2/PVC composites were studied. The nano-SiO2 particles treated with KH570 or DMCS significantly reinforced and toughened the PVC composites. The maximum impact strength of PVC composites was achieved at a weight ratio of nano-SiO2/PVC:4/100. The tensile yield stress increased with increasing the content of treated inorganic particles. The incorporation of untreated nano-SiO2 particles adversely affected the tensile strength of the composite. Although the equilibrium torques of all nano-SiO2/PVC composites were higher than that of pure PVC, the surface treatments did reduce the equilibrium torque. The interfacial interaction parameter, B, and interfacial immobility parameter, b, calculated respectively from tensile yield stress and loss module of nano-SiO2/PVC composites, were employed to quantitatively characterize the effective interfacial interaction between the nano-SiO2 particles and PVC matrix. It was demonstrated that the nano-SiO2 particles treated with KH570 had stronger effective interface interaction with PVC matrix than those treated with DMCS, which also had stronger effective interface interaction than the untreated nano-SiO2 particles.

The Surface Modification of Nanosilica, Preparation of Nanosilica/acrylic Core‐shell Composite Latex, and Its Application in Toughening PVC Matrix

Synthesis of ACR/nanometer SiO2 Composite Particles and Their Tonghening Effect on PVC

Surface-modified nanometer silica toughening and reinforcing polyvinylchloride

Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization

Silica Hybrid Particles with Nanometre Polymer Shells and Their Influence on the Toughening of Polypropylene.

Research of the Synthesis and Film Performance of Silica/poly(st-Ba-mps) Core-Shell Latexes Obtained by Miniemulsion Co-Polymerization

ENHANCED MECHANICAL PROPERTIES OF POLYPROPYLENE/SILICA NANOCOMPOSITES WITH SURFACE MODIFICATION OF NANO-SILICA VIA IN SITU COPOLYMERIZATION OF METHYL METHACRYLATE AND BUTYL ACRYLATE

Surface‐modified Silica Nanoparticles for Reinforcement of PMMA

Effects of the Reinforcement and Toughening of Acrylate Resin/Caco3 Nanoparticles on Rigid Poly(Vinyl Chloride)

A Novel Method of Hyperbranched Poly(Amide-Ester) Modifying Nano-Sio2 and Study of Mechanical Properties of Pvc/Nano-Sio2 Composites

Solid Mechanochemical Preparation Of Core-Shell Sio2 Particles And Their Improvement On The Mechanical Properties Of Pvc Composites

Irradiation-Induced Surface Graft Polymerization Onto Calcium Carbonate Nanoparticles and Its Toughening Effects on Polypropylene Composites

Preparation of Polypropylene/Silica Nanocomposites by Melt-blending of Surface-modified Silica and Polypropylene

Effects of surface modification of fumed silica on interfacial structures and mechanical properties of poly(vinyl chloride) composites

Interfacial adhesion and mechanical properties of PMMA-coated CaCO3 nanoparticle reinforced PVC composites

Preparation and properties of core-shell nanosilica/poly(methyl methacrylate-butyl acrylate-2,2,2-trifluoroethyl methacrylate) latex

Preparation and Characterization of Nano-Caco3 Encapsulated with Polyacrylic and Its Application in Pvc Toughness

The Properties of High Solid Acrylic Based Polyurethane and Acrylic Latex Embedded with Nano-Silica

Toughening and reinforcement of rigid PVC with silicone rubber/nano-CACO3 shell-core structured fillers

Toughening of Epoxy Resin with Poly(Methyl Methacrylate) Grafted Silica Core-Shell Particles

Fabrication and Characterization of Polysiloxane/polyacrylate Composite Latexes with Balanced Water Vapor Permeability and Mechanical Properties: Effect of Silane Coupling Agent