Abstract:The residence time distribution (RTD) is an important parameter for quantifying the material flow and mixing performance in twin-screw extruders, and the in-line measurement is the important means to obtain the RTD of the extruder. However, most of previous instrumentations have only single probe and are limited to obtain global RTDs only. The authors developed a fluorescence monitoring device which has dual probes and can obtain simultaneously two sets of data for partial and global RTDs separately. The probes developed can resist high temperature and pressure, and it can be installed in any position of the extruder barrel. The effects of various operating conditions, such as feeding rate and screw speed, on the partial and global RTDs were investigated. The results show that increasing the screw speed and feeding rate will move the RTD curve toward shorter times, and the shape of the RTD curve is dominated by throughput. Local RTD can be obtained by deconvolution of two partial RTDs, which can be used to compare the mixing performance of different screw elements and select reasonable modeling parameters of the twin-screw extruder. Through the transformation of the time region of the RTDs, the residence revolution distribution (RRD) and residence volume distribution (RVD) can be obtained, which directly correspond to screw revolution and extrudate volume separately. However, for a screw extruder with fixed configuration, the curves of RRD and RVD will approach to the same shape when the ratio of volume throughput to screw speed, QIN, is equal, whatever the individual values of Q and N may be.

STUDY OF THE RESIDENCE TIME DISTRIBUTION IN THE BUSS KNEADER

Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder

Study of Residence Time Distribution in a Reciprocating Single-Screw Pin-Barrel Extruder

Mixing Intensification in a Horizontal Self-Cleaning Twin-Shaft Kneader with a Highly Viscous Newtonian Fluid

Residence time distribution in a new horizontal self-cleaning reactor with viscous media

Numerical Simulation of Hydrodynamics and Mixing Characteristics of High-Viscosity Non-Newtonian Fluid in Twin-Shaft Kneaders

Local Residence Time, Residence Revolution, and Residence Volume Distributions in Twin-Screw Extruders

Effects of Screw Reciprocation and Pin Arrangement of Buss Kneader on Mixing Performance

Local residence time distribution in twin-screw extruder

Assessing Local Residence Time Distributions in Screw Extruders Through a New In‐line Measurement Instrument

Simulation of Residence Time Distribution During the Extrusion in a Twin Screw Extruder

EFFECT OF OPERATING CONDITIONS ON THE MIXING PERFORMANCE OF THE SCREW ELEMENT AND THE KNEADING BLOCK IN A TWIN-SCREW EXTRUDER

THE DEVELOPMENT OF SIMULATION OF RESIDENCE TIME DISTRIBUTION IN SCREW EXTRUDERS

Numerical Simulation and Experimental Validation of Mixing Performance of Kneading Discs in A Twin Screw Extruder

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Interaction effect between influence factors of residence time distribution in twin screw extruder

The Screw Geometry of Parallel Twin-Screw Extruder

A comprehensive review on residence time distributions in co-rotating twin-screw extrusion

Simulative Analyses and Experimental Researches of Three Forms of the Kneading Equidirectional Twin Screws

Design of the Novel Mixing Element and the Study on Its Mixing Performances in the Buss Kneader

Study on Mixing Performance of Kneading Discs in Series Disc-Screw Extruder