Abstract:We report a type of multimode fiber interferometers (MMI) formed in photonic crystal fiber (PCF). To excite the cladding modes from the fundamental core mode of a PCF, a coupling point is formed. To form the coupling point, we used the method that is blowing compressed gas into the air-holes and discharging at one point, and the air-holes in this point will expand due to gas expansion in the discharge process. By placing two coupling points in series, a very simple all-fiber MMI can be implemented. The detailed fabrication process is that the one end of the PCF is tightly sealed by a short section of single mode fiber (SMF) spliced to the PCF. The other end of the PCF is sealed into a gas chamber and the opened air holes are pressurized. The PCF is then heated locally by the fusion splicer and the holes with higher gas pressure will expand locally where two bubbles formed. We tested the RI responses of fabricated sensors at room temperature by immersing the sensor into solutions with different NaCl concentration. Experimental results show that as refractive-index (RI) increases, the resonance wavelength of the MMI moves toward longer wavelengths. The sensitivity coefficients are estimated by the linear fitting line, which is 46nm/RIU, 154mn/RIU with the interferometer lengths (IL) of 3mm and 6mm. The interferometer with larger IL has higher RI sensitivity. The temperature cross-sensitivity of the sensor is also tested. The temperature sensitivity can be as low as -16.0pm/degrees C.

In-Fiber Modal Interferometer Based on Dual-Concentric-Core Photonic Crystal Fiber and Its Strain, Temperature and Refractive Index Characteristics

Direct Observation of Multimode Interference in Rare-Earth Doped Micro/nanofibers

Multimode Interferometer Based on a Core-Offset Singlemode-Multimode-singlemode Fiber Structure

Mid-infrared dual-cladding photonic crystal fiber with high birefringence and high nonlinearity

Thin-Core Fiber Sandwiched Photonic Crystal Fiber Modal Interferometer for Temperature and Refractive Index Sensing

A Mach–Zehnder Interferometer Based on a No-Core Fiber With In-Fiber Waveguides

Multibeam Interferometer Using a Photonic Crystal Fiber with Two Asymmetric Cores for Torsion, Strain and Temperature Sensing

Photonic crystal fiber refractive-index sensor based on multimode interferometry

Inline fiber interference-based refractive-index sensor

Negative Curvature Hollow Core Fiber Based All-Fiber Interferometer and Its Sensing Applications to Temperature and Strain

Photonic crystal fibre based modal interferometer with four-beam path interference

Fiber in-line Mach–Zehnder interferometer constructed by selective infiltration of two air holes in photonic crystal fiber

A Three-Beam Path Photonic Crystal Fiber Modal Interferometer and Its Sensing Applications

An in-fiber Mach–Zehnder strain sensor for studying multimode interference of light

Experimental Study of Mode Field Evolution of Dual-Core Photonic Crystal Fiber

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

Temperature and Strain Sensor Based on a Few-Mode Photonic Crystal Fiber

Temperature-independent strain sensor based on simplified hollow-core photonic crystal fibers

An Integrated Fiber Michelson Interferometer Based on Twin-Core and Side-Hole Fibers for Multiparameter Sensing

Bent-fiber Intermodal Interference Based Dual-Channel Fiber Optic Refractometer

In-Line Interferometric Temperature Sensor Based on Dual-Core Fiber