Abstract:With the increasing attention on oceanography, more effective exploration technology has been of great interests in the community of ocean engineering. Side-scan sonar is a popular imaging equipment for seabed topography; however, it is commonly used under 4 knots, which does not meet the actual demand of the modern oceanographic research. This paper proposes a high-speed side-scan sonar imaging scheme based on multi-beam forming technology. In this scheme, the digital signal processing system can adjust the maximum response direction of the receiving array by introducing appropriate phase shift or time delay to the output, so as to increase the scanning range and then improve operation efficiency. In order to verify the feasibility of this imaging algorithm, an ocean environment model is constructed, which simulates the acoustic propagation theory, the principle of seabed acoustic backscattering and the acoustic signal modulation method. After analyzing the acoustic characteristics of uniform linear array, an underwater acoustic transducer with multiple receiving subarrays is designed. In the process of simulated navigation, the receiving subarrays will generate the electrical signal containing seabed acoustic information. Based on the simulation signal, the parameters of the digital filter in the actual system can be determined in advance, which provides convenience for later processing. The time delay matrix of each receiving channel based on dynamic focusing beamforming method can be verified by imaging the seabed model. The processed acoustic data are combined with GPS information and heading angle to generate seabed scanning image in the host computer system. This paper mainly presents the imaging algorithm of multi-beam side-scan sonar digital signal processing system.

THE DEVELOPMENT OF FOUR-CHANNEL IMMERSION ULTRASONIC C-SCAN TESTING SOFTWARE

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Research on Ultrasonic C-scan Technique for Large Unsymmetric Composite Component

The Establishment of Ultrasonic C scan System and Program Development

Research on Ultrasonic Detection of Complex Surfaces

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

An Imaging Algorithm for High-speed Side-scan Sonar Based on Multi-beam Forming Technology

High-Speed Linear Array Ultrasonic Phased Array Automatic Testing

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Motion Control System of Ultrasonic C-Scan Testing Equipment for Composite Materials

Three Dimensional Imaging Based On Ultrasonic Linear Phased Array Probe

Design and Realization of Multi-channel Ultrasonic Data Acquisition and Storage

Curved Path Planning Based on 3D Vision Water Immersion Ultrasonic Nondestructive Testing

Development of Ultrasonic Testing System for Large Cylindrical Parts

Signal Analysis of Ultrasonic C-Scan Testing for Multi-layer Welding Structure

The PC-based CNC System on the Automatic Scanning System in Ultrasonic Nondestructive Testing

Ultrasonic full-matrix imaging of curved-surface components

Three-Dimensional Reconstruction of Ultrasound Images Based on Area Iteration.

The Ultrasonic Automatic Scanning Control System of Pipeline Girth Welds Based on LabWindows/CVI

The 5-axes automatic scanning system of ultrasonic testing

Application of Ultrasonic Squirter Transmission Method in Detection of Advanced Composite Materials