Abstract:With continuous technological development, the future development trend of LiDAR in the field of remote sensing and mapping is to obtain the elevation and spectral information of ground targets simultaneously. Airborne hyperspectral imaging LiDAR inherits the advantages of active and passive remote sensing detection. This paper presents a simulation method to determine the design parameters of an airborne hyperspectral imaging LiDAR system. In accordance with the hyperspectral imaging LiDAR equation and optical design principles, the atmospheric transmission model and the reflectance spectrum of specific ground targets are utilized. The design parameters and laser emission spectrum of the hyperspectral LiDAR system are considered, and the signal-to-noise ratio of the system is obtained through simulation. Without considering the effect of detector gain and electronic amplification on the signal-to-noise ratio, three optical fibers are coupled into a detection channel, and the power spectral density emitted by the supercontinuum laser is simulated by assuming that the signal-to-noise ratio is equal to 1. The power spectral density emitted by the laser must not be less than 15 mW/nm in the shortwave direction. During the simulation process, the design parameters of the hyperspectral LiDAR system are preliminarily demonstrated, and the feasibility of the hyperspectral imaging LiDAR system design is theoretically guaranteed in combination with the design requirements of the supercontinuum laser. The spectral resolution of a single optical fiber of the hyperspectral LiDAR system is set to 2.5 nm. In the actual prototype system, multiple optical fibers can be coupled into a detection channel in accordance with application needs to further improve the signal-to-noise ratio of hyperspectral LiDAR system detection.

Spaceborne Hyperspectral Image Generation Based on Airborne Hyperspectral Image

Real-time Analysis and Simulation of Remote Sensing Photoelectric Information from Aerospace Fourier Transform Infrared Spectrometer

Deeply Learned Broadband Encoding Stochastic Hyperspectral Imaging.

A Compact Compressive Hyperspectral Imaging System Based on Metasurface

Simulation of Remote Sensing Images Using High-Resolution Data and Spectral Libraries

Image capture: simulation of sensor responses from hyperspectral images

On-board Spectral Calibration Algorithm for an Airborne Hyperspectral Imager and Elimination of the Effect of the Atmospheric Underlying Surface.

Simulation of EO-1 Hyperion Data from ALI Multispectral Data Based on the Spectral Reconstruction Approach.

[Evaluation of sensor spectral parameters for the simulation accuracy of the vegetation spectrum]

Modeling for space-based visible imaging characteristics of space object

Parameter Simulation and Design of an Airborne Hyperspectral Imaging LiDAR System

Solar radiation modeling and simulation of hyperspectral satellite data

Snapshot Hyperspectral Imaging Via Spectral Basis Multiplexing in Fourier Domain

Atmosphere and Terrain Coupling Simulation Framework for High-Resolution Visible-Thermal Spectral Imaging over Heterogeneous Land Surface

Space-Based optical imaging dynamic simulation for spatial target

High-resolution airborne SAR image simulation based on RD model and DEM data

Hyperspectral remote sensing system for nanosatellite-imaging spectrometer based on spatially linear variable filter (SVFIS)

Optical Image Simulation System for Space Surveillance

High-Fidelity Hyperspectral Snapshot of Physical World: System Architecture, Dataset and Model

Simulation of Infrared Radiation from Outer Space Targets and Environment, and Its Generation Technique of Scene

Design of a Spaceborne, Compact, Off-Axis, Multi-Mirror Optical System Based on Freeform Surfaces