Abstract:ZrO2-based catalysts doped with CeO2 or Y2O3 were prepared by coprecipitation and the catalytic performance of each was evaluated in the selective synthesis of isobutene and isobutane (i-C4) from CO hydrogenation at 673 K, 5.0 MPa, and 650 h−1. The physical properties and chemical properties (acid–base and redox) of the catalysts were systematically characterized and related to the catalytic performance. The catalytic activities and selectivities of the ZrO2-based catalysts varied with the quantity of CeO2 and Y2O3 doped. The physical properties, such as surface areas, cumulative pore volumes, average pore diameters, crystal phases, and crystal sizes had no appreciable effects on the catalytic performance of the catalysts. Temperature-programmed reduction (TPR) of H2 measurements showed that the addition of CeO2 or Y2O3 into ZrO2 enhanced the reduction properties of the catalysts. The highest activities and C4 selectivities in total hydrocarbons were obtained over the catalysts which have a maximum amount of H2 consumption measured by TPR technology for both CeO2- and Y2O3-doped ZrO2-based catalysts. The selectivity to i-C4 in total hydrocarbons also achieved a maximum over the catalyst (50% CeO2-doped ZrO2) which has a maximum amount of H2 consumption in the TPR for the CeO2–ZrO2 mixed oxide catalysts. For the Y2O3–ZrO2 mixed oxide catalysts, high selectivities to i-C4 in total hydrocarbons were obtained over the catalysts with the contents of doped Y2O3 ranging from 4.5 to 8.6%; whereas the maximum H2 consumption was attained at 8.6% Y2O3 doped. The acid–base properties also played a significant role in determining the activity and selectivity of the ZrO2-based catalysts in the CO hydrogenation. A coordination of redox and acid–base properties accounts for the remarkable improvement of reaction activities and selectivities over the CeO2- or Y2O3-doped ZrO2-based catalysts in this investigation.

Selective Formation of Isobutene from Co Hydrogenation over Zirconium Dioxide Based Catalysts

Synthesis of isobutene from CO hydrogenation over nanosized zirconium dioxide-based catalysts

Influence of Acidic and Basic Properties of Zro2 Based Catalysts on Isosynthesis

Selectively Synthesize Isobutene From Co Hydrogenation Over Zro(2) Based Catalysts In A Specially Designed Reactor.

Effects of CO2 on synthesis of isobutene and isobutane from CO2/CO/H2 reactant mixtures over zirconia-based catalysts

Synthesis of isobutene from synthesis gas over nanosize zirconia catalysts

Highly selective formation of isobutene over Zn modified m-ZrO2 catalyst from syngas

Synthesis of iso-C4 hydrocarbons from CO hydrogenation over Pr6O11 and Pr-Zr-O composite oxide catalysts

Selective conversion of CO2 to isobutane-enriched C4 alkanes over InZrOx-Beta composite catalyst

Effects of redox properties and acid–base properties on isosynthesis over ZrO2-based catalysts

Influence of Channel, Construction and Brønsted Acid Sites on the Catalytic Conversion Pathways of Isobutane over MFI, TON and RFE Zeolites

C2–C4 Hydrocarbons Synthesis from Syngas over CuO–ZnO–Al2O3/SAPO‐34 Bifunctional Catalyst

Effect of Preparation Method on ZrO2-Based Catalysts Performance for Isobutanol Synthesis from Syngas

Realizing and Revealing Complex Isobutyl Alcohol Production over a Simple Cu–ZrO 2 Catalyst

Effect of different zeolite supports on the product distribution of CO hydrogenation

A Mesoporous Ce 0.5 Zr 0.5 O 2 Solid Solution Catalyst for CO Hydrogenation to Iso-C 4 Hydrocarbons

Excellent catalytic performance over hierarchical ZSM-48 zeolite: Cooperative effects of enhanced mesoporosity and highly-accessible acidity

ZnO Supported on Silicalite-1 As an Efficient Catalyst for Isobutane Dehydrogenation to Isobutene Assisted by CO2

Selective Conversion of CO2 into Propene and Butene

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

CO hydrogenation to iso-C4 hydrocarbons over CeO2–TiO2 catalysts