Abstract:The global challenge of energy sustainability has remained an unresolved issue up to this point. Alternatives are indeed critical in a regime dominated by non-renewable fossil fuels. The potential of Jatropha gossypiifolia L. seeds for bio-oil production was investigated in this study, as it falls under the category of nonedible second-generation feedstock. The seed kernels were oven-dried at 80 °C for 24 h, powdered, and then oven-dried again at 80 °C for 4 h to remove any remaining moisture. Using the central composite design of the response surface methodology, an optimal condition was identified as 6.86:1 n-hexane to biomass (mL g-1), 17 min and 33 s extraction time, constant 15 g biomass, 35 m resonance amplitude, and 20±5 °C temperature. Under optimal conditions, the maximum bio-oil yield from Jatropha gossypiifolia L. was 62.98±1.81%, with physical and chemical characteristics such as a golden yellow color and a density of 0.9273 g mL-1, kinematic viscosity of 21.6–23.2 cSt, and a high heating value of 40.80 MJ kg-1. The FTIR analysis revealed the presence of ester groups in biodiesel’s primary component, bio-oil. The GC-MS analysis revealed significant fatty acid components, including 65.6% linoleic acid, 18.5% oleic acid, 8.64% palmitic acid, 6.0% stearic acid, and 1.26% other fatty acids. The beneficial properties and components of bio-oil established a promising benchmark for biodiesel production. Conversion of the produced bio-oil to biodiesel resulted in a 59.96% recovery rate, indicating the feasibility of using J. gossypiifolia L. seeds as a feedstock for biodiesel production.

Optimization of aqueous enzymatic extraction of oil from jatropha curcas L. seed using response surface methodology

Optimization of Aqueous Enzymatic Extraction of Castor (ricinus Communis) Seeds Oil Using Response Surface Methodology

Optimization of Supercritical Carbon Dioxide Extraction of Curcas Seed Oil with Response Surface Methodology

Response Surface Methodology to Optimize Aqueous Enzymatic Extraction of Soybean Oil Vacuum Extrusion Process

Optimization on Aqueous Enzymatic Extraction Conditions of Blending Oil by Response Surface Method

Optimization of Enzymatic Hydrolysis Conditions of Oil-Tea-Seed Meal Protein Using Response Surface Methodology

Optimization of Extraction Technique of Jatropha Curcas Leave Polysaacharide

Optimization of Ultrasound-Assisted Enzymatic Aqueous Extraction of Oil from Rapeseeds Using Response Surface Methodology and Evaluation of the Effect of Enzymes on Oil Yields

Extraction of Peanut Oil with Ultrasonic- Assisted Aqueous Enzymatic Method

Response surface optimization of the bio-oil yield from Jatropha gossypiifolia L. seeds through ultrasonic-assisted solvent extraction

Optimization of Oil Extraction from Pine Seeds by Response Surface Methodology

The Study of Ultrasonic-Assisted Aqueous Enzymatic Extraction of Oil from Peanut by Response Surface Method

Optimization Of Ultrasound-Assisted Extraction Of Natural Antioxidants From The Flower Of Jatropha Integerrima By Response Surface Methodology

Solvent Extraction of Jatropha Curcas Seed Oil

Optimization of an Aqueous Enzymatic Method and Supercritical Carbon Dioxide Extraction for Paeonia suffruticosa Andr. Seed Oil Production Using Response Surface Methodology (RSM)

Optimization of Enzyme-Assisted Aqueous Extraction of Fructus Cannabis Oil by Response Surface Methodology

Reponses Surface Methodology for Optimization of Supercritical Carbon Dioxide Extraction of Black Currant Seed Oil

Optimization of Extraction Process for Flaxseed Oil by Response Surface Analysis

Optimization of Extraction Free Oil from Rapeseed by Response Surface Method

Optimization of the Aqueous Enzymatic Extraction of Wheat Germ Oil Using Response Surface Methodology

Response Surface Methodology Optimization of Lipase-Catalyzed Transesterification Ofjatropha CurcasL. Seed Oil for Biodiesel Production