Abstract:The biodiesel was synthesized after the oil extraction and pretreatment, which was relatively complex in production and separation process. The separation cost was very large. That will be greatly reduced when the biodiesel was synthesized from the crude oil. The single-step technique was studied on the synthesis of biodiesel from Xanthoceras sorbifolia kernel in this study, using petroleum ether as extraction agent and methanol as synthesis agent. The oil extraction and ester exchange reaction was conducted under water bath heating and magnetic stirring conditions with sodium hydroxide as the catalyst. The single-step technique was investigated to accomplish oil extraction and biodiesel synthesis from Xanthoceras sorbifolia bunge kernel using central composite design. The predictive model of polynomial quadratic equation was established with Design Expert software. In the model, temperature, petroleum ether amount, methanol amount and sodium hydroxide amount were independent variables and biodiesel yield was response value. The results showed that the influencing degree of the four factors on biodiesel yield was petroleum ether amount > methanol amount > the temperature of extraction and reaction>sodium hydroxid amount. The influencing degree of the interaction between the factors on biodiesel yield was as follows:methanol amount and sodium hydroxid amount>the temperature of extraction and reaction and sodium hydroxid amount > the temperature of extraction and reaction and petroleum ether amount>petroleum ether amount and sodium hydroxid amount>the temperature of extraction and reaction and methanol amount>petroleum ether amount and methanol amount. The model could not only predict the biodiesel synthesis rate but also calculate oil recovery. The results showed that the optimal temperature of extraction and reaction was 77℃, petroleum ether amount was 6:1 mL/g, methanol and sodium hydroxide were 12%(mL/g) and 0.3% (g/g) of Xanthoceras sorbifolia bunge kernel amount respectively. Under these conditions, the biodiesel yield was 65.44%. The major components of biodiesel were methyl palmitate, methyl oleate, methyl linoleate, methyl linolenate and methyl erueate. The method provides a reference for oil extraction and biodiesel synthesis from Xanthoceras sorbifolia bunge kernels.

Optimization of Extraction of Oil from Xanthoceras Sorborifolia Bunge with Response Surface Methodology

Optimization of Ultrasonic-assisted Extraction of Xanthium Oil from Xanthium Sibiricum Patr. Using Response Surface Method

Optimization of Ultrasonic Extraction of Oil from Semen Allii Tuberosi by Response Surface Methodology

Optimization of Extraction Process for Flaxseed Oil by Response Surface Analysis

Optimizing Ultrasonic-Assisted Extraction of Apple Seed Oil with Response Surface Methodology

Optimization of ultrasound-assisted extraction process of oils from tilapia offal by response surface methodology

Optimization of Ultrasonic-assisted Extraction of Coix lacryma-jobi Seed Ester Using Response Surface Methodology

Response Surface Methodology to Optimize Aqueous Enzymatic Extraction of Soybean Oil Vacuum Extrusion Process

Optimization of Extraction Process for Polysaccharides from Longan Seeds by Response Surface Methodology

Optimization of Ultrasonic- Assisted Extraction Process for Total Flavonoids from Moringa oleif-era Leaves by Response Surface Methodology

Optimization of Ultrasound-assisted Extraction of Phenolic Compounds from Sugarcane Skin by Response Surface Methodology

Optimization of Accomplishing Oil Extraction and Biodiesel Synthesis by Single-Step Technique from Xanthoceras Sorbifolia Bunge Kernel

Optimization of Microwave-assisted Extraction of Volatile Oil from Fructus Amomi Rotundus by Response Surface Methodology

Optimization on Aqueous Enzymatic Extraction Conditions of Blending Oil by Response Surface Method

Optimization of Supercritical Carbon Dioxide Extraction of Almond Oil with Response Surface Methodology

Optimization of Extraction Process Conditions of Lavender Oleoresin by Response Surface Methodology

Optimization of Oil Extraction from Rice Bran with Mixed Solvent Using Response Surface Methodology

Study on the Aqueous Enzymatic Extraction Condition of Oil from Xanthoceras Sorbiflia bunge Seeds

Optimization of the Extraction Technology of Antrodia Camphorata Polysaccharide Using Response Surface Method

Response Surface Optimization of Ultrasonic-Assisted Oxyresveratrol Extraction from the Bark of Cultured Black Mulberry (Morusnigral.)

Optimization of Ultrasonic-Assisted Synthesizing Technology of Fatty Acid Methyl Esters with Xanthoceras Sorbifolia Bunge Seeds Oil