Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The fossil fuel-based energy supply represents dominant role in the developing countries like India. The extensive utilization of fuel in the industrial sector and transportation sector brings down the available fuel resources and also ensues environmental and health issues. Biodiesel is one of the major replacements for fossil fuel since it is renewable and green fuel. The current study perceives from futuristic notion and that has resulted in a mixture of nonedible oil feedstock in the use of biodiesel production by mixing castor oil (CO), mahua oil (MO), processed dairy waste (PWD) in equal volume. Five-level three-parameter design of experiment is proposed to optimize transesterification reaction parameters to achieve higher biodiesel yield (fatty acid methyl ester (FAME) conversion). The response surface methodology (RSM) based on central composite design (CCD) was used to predict optimal transesterification reaction parameters such as percentage of catalyst utilization, reaction temperature, and methanol-to-oil molar ratio. Based on the RSM-CCD result, the optimum transesterification reaction parameters of the proposed mixed oil were found to be 2.82 wt% of catalyst utilization, 63.93°C reaction temperature, and 7.86:1 methanol-to-oil molar ratio with maximum yield of 95.9135% and experimentally 94.0%. The fuel properties were measured as per ASTM D6751 standards and results disclosed that the prepared nonedible mixed oil is an effective feedstock for biodiesel production. This research work aimed to dwindle the dependency on crude oil and thereby ameliorating the energy security in a constructive and eco-friendly method. Hence, this work also reports the biodiesel production cost from the proposed novel mixed nonedible oil.

Optimization of the enzymatic pre-treatment process for mustard oilseeds using response surface methodology

Optimisation of Enzymatic Pretreatment of Soybean Oil Deodoriser Distillate for Concentration of Tocopherols

Optimisation, experimental validation and thermodynamic study of the sequential oil extraction and biodiesel production processes from seeds of Sterculia foetida

Enhanced Oil Recovery by Pre-treatment of Mustard Seeds Using Crude Enzyme Extract Obtained from Mixed-Culture Solid-State Fermentation of Kinnow (Citrus reticulata) Waste and Wheat Bran

Optimization of immobilized lipase catalyzed transesterification of cottonseed oil for biodiesel production using response surface methodology

Optimization of Enzymatic Degumming Process for Sunflower Oil using Response Surface Methodology: Efficiency and Oil Yield

Optimization Of Process Parameters For Extraction Of Descurainia Sophia Seed Oil With Response Surface Methodology

Optimization of Process Parameters in Preparation of Nanoemulsions of CLnA Rich Oil by Response Surface Methodology

Effectiveness of RSM based Central Composite Design for optimization of in-situ biodiesel production process from castor seeds

Optimization of Oil Extraction from Pine Seeds by Response Surface Methodology

Optimization of biodiesel production process for mixed nonedible oil (processed dairy waste, mahua oil, and castor oil) using response surface methodology

Optimization of process variables on two-step microwave-assisted transesterification of waste cooking oil

Parametric optimization of separation of succinic acid in groundnut oil with Tri‐n‐butyl phosphate using response surface methodology with central composite design

Optimization of Pretreatment for Concentrating Natural Tocopherols by Response Surface Methodology

Optimization of the Lipase-Catalyzed Irreversible Transesterification of Pistacia Chinensis Bunge Seed Oil for Biodiesel Production

Process optimization of esterification for deacidification in waste cooking oil: RSM approach and for biodiesel production assisted with ultrasonic and solvent

Optimization of oil extraction from Lallemantia iberica seeds using ultrasound-assisted extraction

Production, Partial Purification and Optimization of Oilseed-Based Protease and its Application as an Efficient Eco-Friendly Alternative for Destaining and Dehairing Process

Optimization of microwave-assisted biodiesel production using response surface methodology

Optimization of Oil Extraction from Rice Bran with Mixed Solvent Using Response Surface Methodology

Optimization and synthesis process of biodiesel production from coconut oil using central composite rotatable design of response surface methodology