Abstract:Utilizing carbon nanotubes (CNTs) as substitutes for the conventional rigid indium-tin oxide (ITO) electrodes, all CNT based flexible field emission devices (FEDs) were possible to prepare with a novel film transfer method. In the method, both CNT-based flexible cathode and anode were fabricated by first attaching the vacuum filtered CNT film/mixed cellulose eater (MCE) filter membrane to an adhesive semi-cured poly(dimethyl siloxane) substrate, and then peeling off the MCE filter membrane. Effects of bending direction and bending radius on field emission properties were studied. The field emission performance of the convex bending device was worse than that of the flat device and deteriorated further with the decrease of bending radius. In contrast, the concave bending device exhibited better field emission properties than the flat device; nevertheless, its field emission properties decreased as the concave bending radius reduced below a certain value. The method achieved two successes. One is that the interfacial interaction between CNT films and the flexible substrate was greatly enhanced. The other is that the transfer process improved the field emission properties due to the increase of vertically aligned CNT tips. Compared with traditional methods applied in FED preparation, the novel modified transfer method is organic free, easy to control, cheap, and environment friendly.

Getter Embedding Carbon Nanotube Cathode for Large-Area Field-Emission Display

Carbon Nanotube Displays

Carbon-nanotube Based Paste for Field Emission Display Application

Synthesis and Characterization of Carbon Nanotube Grown on Flexible and Conducting Carbon Fiber Sheet for Field Emitter

Fabrication Of Field Emission Cathode By Spraying Multiwalled Carbon Nanotubes On Screen Printed Substrate

Research on key techniques of carbon nanotube field emission display

The Fabrication and Operation of Fully Printed Carbon Nanotube Field Emission Displays

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

Carbon Nanotube Field Emission Displays and Their Fully Printing Fabrication Techniques

New-type planar field emission display with superaligned carbon nanotube yarn emitter.

Fabrication of carbon nanotube and carbon nanofiber field emission cathode by composite electrodeposition

Carbon Nanotubes On Carbon Fabrics For Flexible Field Emitter Arrays

Study on The Architecture for Triode Carbon Nanotube Field Emission Display Based on Screen-printing Process

Fabrication of Diode-Type Field Emission Display Module with Carbon Nanotube Cathode

Development of carbon nanotube light array for large-size display

Achieving Uniform Field Emission from Carbon Nanotube Composite Cold Cathode with Different Carbon Nanotube Contents: Effects of Conductance and Plasma Treatment

A Method to Improve Big Area Field Emission Competence of Carbon Nanotube

Scanning focused laser activation of carbon nanotube cathodes for field emission flat panel displays.

Electrophoretic Carbon Nanotube Field Emission Layer for Plasma Display Panels

Field-emission cathode with carbon nanotubes on stainless steel substrate and its application to pixel tubes