Abstract:Utilizing carbon nanotubes (CNTs) as substitutes for the conventional rigid indium-tin oxide (ITO) electrodes, all CNT based flexible field emission devices (FEDs) were possible to prepare with a novel film transfer method. In the method, both CNT-based flexible cathode and anode were fabricated by first attaching the vacuum filtered CNT film/mixed cellulose eater (MCE) filter membrane to an adhesive semi-cured poly(dimethyl siloxane) substrate, and then peeling off the MCE filter membrane. Effects of bending direction and bending radius on field emission properties were studied. The field emission performance of the convex bending device was worse than that of the flat device and deteriorated further with the decrease of bending radius. In contrast, the concave bending device exhibited better field emission properties than the flat device; nevertheless, its field emission properties decreased as the concave bending radius reduced below a certain value. The method achieved two successes. One is that the interfacial interaction between CNT films and the flexible substrate was greatly enhanced. The other is that the transfer process improved the field emission properties due to the increase of vertically aligned CNT tips. Compared with traditional methods applied in FED preparation, the novel modified transfer method is organic free, easy to control, cheap, and environment friendly.

Field-emission cathode with carbon nanotubes on stainless steel substrate and its application to pixel tubes

Cold linear cathodes with carbon nanotube emitters and their application in luminescent tubes

Fabrication Of Field Emission Cathode By Spraying Multiwalled Carbon Nanotubes On Screen Printed Substrate

Highly uniform field emission cathode with multi-walled carbon nanotubes and its application to lighting elements

Outstanding Field Emission Properties Of Wet-Processed Titanium Dioxide Coated Carbon Nanotube Based Field Emission Devices

Fabrication and electrical characteristics of carbon nanotube field emission microcathodes with an integrated gate electrode

Carbon Nanotube Displays

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Enhanced Field-Emission Performance from Carbon Nanotube Emitters on Nickel Foam Cathodes

Spherical Field Emission Cathode Based on Carbon Nanotube Paste and Its Application in Luminescent Bulbs

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

Mechanical Fabrication of Carbon Nanotube Films and Their Field-Emission Properties

Enhanced Field Emission of Single-Wall Carbon Nanotube Cathode Prepared by Screen Printing with a Silver Paste Buffer Layer

Synthesis and Characterization of Carbon Nanotube Grown on Flexible and Conducting Carbon Fiber Sheet for Field Emitter

Luminescent tubes with line-type carbon nanotube cold cathode and reflecting anode

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Low Temperature Growth of Carbon Nanotube on Glass Substrate and Its Application in Field Emission Display

Carbon-nanotube Based Paste for Field Emission Display Application

Flat-panel luminescent lamp using carbon nanotube cathodes

P2&#x2013;5: Fabrication and Characterization of 4.3-Inch Carbon Nanotube Cold Cathodes for Field Emission Flat Panel Light Source

Carbon Nanotubes On Carbon Fabrics For Flexible Field Emitter Arrays