Abstract:Waterborne polyurethane(WPU)hybrid emulsions were prepared by using toluene diisocyanate(TDI),polycaprolactone glycol(PCL220N),dimethylol propionic acid(DMPA)as basic materials,the trimethylol-propane(TMP)as cross-linker,epoxy resin and rosin as modification agents.The effects of the contents of epoxy resin,TMP and rosin on the mechanical and adhesive properties of WPU prepared were investigated.The FT-IR spectrum of modified WPU emulsion prepared shows that the epoxy resin and rosin attend the reaction and finally form the polyurethane hybrid emulsion modified by epoxy resin and rosin.The mechanical experiments show that the toughness and tensile strength of the modified WPU film are improved by introduction of epoxy resin,and the introduction of rosin reduces the Young’s module and tensile strength of the modified WPU film,and meanwhile the elongation at break of the film is improved too.The Young’s module and tensile strength of the modified WPU film can also be greatly improved by using proper amount of TMP.The adhesion experiments show that the content of epoxy resin has a significant effect on the T-peel strength of the modified WPU film;the T-peel strength and initial tack of the film increase to their maximum with the increase of the rosin content and then decrease.The T-peel strength of the film is also affected by the content of TMP;the more TMP is used,the larger the T-peel strength of the film is.The mechanical properties of the prepared modified WPU film can be the best when the content of epoxy resin,rosin and TMP are 5.65%,8.92%and 2.7%,respectively.The adhesive agent formulated by above multi-modified WPU can meet the need of the adhesion between the laminated soft package films.

Study of Performance of Crosslinkable Waterborne Polyurethane-Acrylate Wood Coatings

The Coating Properties of Waterborne UV-Curable Polyurethane Acrylate and Influencing Factors

Study on preparation of aliphatic water-based hybrid emulsion of polyurethane-acrylate by multiple crosslink modification

Waterborne Air-Dry PUA Wood Coatings

Preparation and Properties of a Novel Cross-Linked Network Waterborne Polyurethane for Wood Lacquer

Synthesis of Waterborne Polyurethane-Acrylate Modified with Epoxy Resin

Synthesis and Application of Hydroxyethyl Methacrylate Modified Waterborne Polyurethane

Influence Factors of the Performance of Crosslinked Waterborne Polyurethane

High Performances Polyurethane-Urea Polyacrylate Hybrid Emulsion Coatings with Multiple Crosslinking Structures

Development of waterborne carpentry paint with multiple cross linking modification

Effect of Mixing of Waterborne Resins and Selection of Film-forming Agents on the Properties of One-component Waterborne Wood Paint

Synthesis and Performance of Acrylpimaric Acid Neopentyl Glyol Ester-Polycarbonate Diols Based Waterborne Polyurethane-Acrylate Hybrid Emulsion

Studies on water resistance of the films from waterborne polyurethane hybrid emulsion

Synthesis and Characterization of High Performance Water Borne Polyurethane Emulsion

Study on waterborne polyurethane-acrylate with multiple crosslinking modification and its phase inversion

Preparation, Characterization, and Property Analysis of Environmentally Friendly Waterborne Polyurethane-Acrylate

Study on the Mechanical and Adhesive Properties of Waterborne Polyurethane with Multiple Modifications

Preparation, Thermal Property and Morphology Analysis of Waterborne Polyurethane-Acrylate

Preparation, properties and application of waterborne hydroxyl-functional polyurethane/acrylic emulsions in two-component coatings

Synthesis and Property Study of Organic Silicon Modified Styrebe-butyl Acrylate Emulsion for Water-borne Wood Coatings

Multiple Crosslinking Ultraviolet-Curable Waterborne Polyurethane Coatings