Experimental investigation of plastic finned-tube heat exchangers, with emphasis on material thermal conductivity

Lin Chen,Zhen Li,Zeng-Yuan Guo

DOI: https://doi.org/10.1016/j.expthermflusci.2009.04.001

IF: 3.2

2009-01-01

Experimental Thermal and Fluid Science

Abstract:In this paper, two modified types of polypropylene (PP) with high thermal conductivity up to 2.3W/m K and 16.5W/m K are used to manufacture the finned-tube heat exchangers, which are prospected to be used in liquid desiccant air conditioning, heat recovery, water source heat pump, sea water desalination, etc. A third plastic heat exchanger is also manufactured with ordinary PP for validation and comparison. Experiments are carried out to determine the thermal performance of the plastic heat exchangers. It is found that the plastic finned-tube heat exchanger with thermal conductivity of 16.5W/m K can achieve overall heat transfer coefficient of 34W/m2 K. The experimental results are compared with calculation and they agree well with each other. Finally, the effect of material thermal conductivity on heat exchanger thermal performance is studied in detail. The results show that there is a threshold value of material thermal conductivity. Below this value improving thermal conductivity can considerably improve the heat exchanger performance while over this value improving thermal conductivity contributes very little to performance enhancement. For the finned-tube heat exchanger designed in this paper, when the plastic thermal conductivity can reach over 15W/m K, it can achieve more than 95% of the titanium heat exchanger performance and 84% of the aluminum or copper heat exchanger performance with the same dimension.