Abstract:As increasing fiber hydrophobicity can significantly improve the paper dewatering process, we found that replacing SBKP and HBKP with 0.5% superhydrophobic CPGMA can significantly improve the dewatering of paper sheets. Therefore, it can be concluded that if CPGMA has little effect on paper properties, it will have potential industrial value in the papermaking industry. Consequently, it is necessary to further study the effect of the CPGMAs@CPAM/SiO2/APAM system on paper properties. To evaluate the application potential of the system in the papermaking industry, we investigated the effects of CPGMAs, which replaced the fibers in the stocks, on the paper properties in the CPAM/SiO2/APAM system. The findings demonstrate that as the CPGMA replacement increased, the paper's tensile strength, bursting strength, tear resistance, and folding endurance all declined. The trend can be segmented into two phases: a rapid decrease for substitution amounts below 0.5% and a gradual decline for substitution amounts exceeding 0.5%. When replaced with a small amount of CPGMAs, there was a negligible effect on these properties. Second, the paper air permeability increased with the CPGMA substitution amount in the stock. Furthermore, the trend of paper air permeability can be divided into two stages—a rapid stage with a substitution amount of 0.5%. A small amount of CPGMAs could distinctly improve the paper's air permeability. Third, CPGMAs, which replaced fibers in the stock, minutely affected the paper formation. A small amount of CPGMAs substantially boosted the efficacy of the process of paper manufacture and certain characteristics of the paper, and it had a negligible impact on the strength of paper. The CPGMAs@CPAM/SiO2/APAM technology has the potential to improve the retention and filtration performance of CPAM/SiO2/APAM.

Improvement of Paper Properties by Cationic Phyllostachys Hemicelluloses

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Comparison of the internal functionalization and surface modification methods of chemi-mechanical pulp handsheets using nanocellulose, chitosan, and DTPA

Preparation and Application of Cationic Modified Cellulose Fibrils as a Papermaking Additive

Cationized dialdehyde cellulose synthesized with deep eutectic-like solvents: Effects on sheet dewatering and mechanical properties when used as wet-end additive

Holocellulose fibers and paper from birch based on peracetic acid treatment

A new recognition of the binding of cellulose fibrils in papermaking by probing interaction between nanocellulose and cationic hemicellulose

Reinforcing Paper Strength by Dual Treatment of a Cationic Water-soluble Polymer and Cellulose Nanofibril

Study on the enhancement of paper tensile strength and hydrophobicity by adding PEI-KH560 in pulp suspension

Preparation of coated paper reinforced by a blend of anionic-starch-based nanocellulose/chitosan and its properties

Effect of chitosan and cationic polyacrylamide on optical and mechanical properties of paper made from chemi-mechanical pulps

Effects of pretreatment on the recycling properties of birch holocellulose paper

Creating bulky papers with hydroxypropyl methylcellulose

Optimizing Mixed Waste Paper Properties Through Formamidine Sulfinic Acid Bleaching and Cationic Additive Treatments

Supramolecular structure assessment of alkali modified eucalyptus kraft pulp for gentle hygienic fluff pulp applications

Long-term consequences of treatment interruptions in chronically HIV-1-infected patients.

Ultrasonic-assisted ionic liquid treatment of chemithermomechanical pulp fibers

Influence of heavy metal contamination on urban natural enemies and biological control.

Effect of Sheet Properties of Cellulosic Polyglycidyl Methacrylate-Grafted Fibers in a Cationic Polyacrylamide/SiO2/Anionic Polyacrylamide Retention Aid System