Abstract:BACKGROUND: The mechanical reliability of occlusal splints and their long-term behavior are significant factors determining the clinical outcome of temporomandibular disorder (TMD) therapy. However, improvements are still needed in this area.OBJECTIVES: This in vitro study aimed to (1) compare the hardness and flexural properties of materials manufactured using 3 techniques for occlusal splint fabrication (conventional heat curing, thermoforming followed by light curing, and three-dimensional (3D) printing) and (2) analyze the effect of artificial aging on the properties of the materials.MATERIAL AND METHODS: A total of 120 disc-shaped specimens were manufactured for the Shore D hardness evaluation, and 120 bar-shaped specimens were fabricated for the flexural properties evaluation (n = 15 for each group). Each material was tested in 2 groups of specimens, non-aged and artificially aged (stored for 90 days in water at 37°C). Statistical differences were assessed using one-way or two-way parametric analysis of variance (ANOVA) with Tukey's or Šídák's post-hoc test, or the non-parametric KruskalWallis test with Dunn's post-hoc test. A p-value of less than 0.05 was considered statistically significant.RESULTS: The mechanical properties of the materials varied significantly. Among the non-aged materials, the 3D-printed resin exhibited the highest Shore D hardness (85.3D), but it decreased significantly after 90 days of water storage (80.4D, p < 0.0001). The unpolished heat curing acrylic showed the highest resistance to artificial aging (p = 0.0436). However, its hardness decreased significantly after polishing (81.0D vs. 83.4D, p = 0.0015). The conventional heat curing material also exhibited superior flexural properties (σ = 89.63 MPa, E = 2616 MPa). All tested materials were susceptible to deterioration due to aging.CONCLUSIONS: The conventional method of occlusal splint fabrication remains the optimal choice, particularly for long-term use. However, it is still necessary to develop materials that are resistant to aging in order to ensure successful clinical performance.

Investigation of the anti-heat aging abilities of three silicone rubbers for maxillofacial prostheses.

Comparison of anti-ozone aging properties of three silicone rubbers for maxillofacial prosthese

Mechanical properties of SEI silicone for maxillofacial prosthesis

In vitro cytotoxicity test on aging silicone for maxilloficial prosthesis

Mechanical properties of two kinds of silicone elastomers for maxillofacial prosthesis

Evaluation of the aging resistance of ZY1 and ZY2 silicone elastomers with step-curing

Mechanical characterization and structural analysis of elastodontic appliances under intraoral and artificial aging conditions

Effect of heat ageing on performance of sealants based on hydrogenated nitrile rubber with different hardness

Molecular dynamics supported thermal-moisture aging effects on properties of silicone rubber

Surface roughness of pigmented and non-pigmented maxillofacial silicone elastomer before and after artificial aging

New organosilicon maxillofacial prosthetic materials

Research Progress of Aging Properties of Silicone Rubber

Study on Aging Law of HTPB Polyurethane Elastomer

How does artificial aging affect the mechanical properties of occlusal splint materials processed via various technologies?

Study of heat aging properties of hydrogenated nitrile rubber

Mechanical, Thermal, and Morphological Behavior of Silicone Rubber during Accelerated Aging

The Deterioration of Foamed Silicone Rubber in Humid and Hot Environments

Conductivity Current and Electric Breakdown Properties of Thermally Aged Nano Silicone Rubber

The Effect of Aging Process Conditions on the Thermal Properties of Poly(Dimethylsiloxane)-Based Silicone Rubber

Study of Ageing Properties for Structural Silicone sealants

Thermal Oxidation Ageing Effects on Silicone Rubber Sealing Performance