Abstract:Background: Among the deteriorations that occur in maxillofacial prosthesis due to exposure in various environmental factors, sebaceous oils (sebum) and perspiration are also responsible for several alterations. Purpose: Mechanical properties and color changes of 3 different medical-grade polydimethylsiloxanes were investigated in this study (Elastomer 42, Techsil 25, and M511), after immersion for 6 months in simulated sebum and perspiration at 37 °C. The purpose of this study was to determine the effects of storage in their physical properties. The null hypothesis investigated was that immersion time did not affect the measured properties. Methods: Polydimethylsiloxane specimens were immersed in simulated perspiration and in sebum. Compression tests were conducted on a Zwick testing machine. Shore A hardness measurements were carried out in a CV digital Shore A durometer. Weight changes were measured, and color changes were determined in the CIELAB system, using a MiniScan XE spectrophotometer. Simple mathematical models were developed to correlate the measured properties with the immersion time. The data were analyzed by analysis of variance and Tukey multiple range test at a level of α = 0.05. Results: Specimens immersed in simulated skin secretions became harder because of facilitation of the propagation of cross-linking reaction that probably occurred during aging of the polydimethylsiloxane samples, except for Elastomer 42, which seems to become more soft and ductile after immersed in sebum. Some weight increase was observed for the specimens immersed into the aqueous solutions, whereas for those immersed in sebum, weight loss was recorded, probably because of extraction of some compounds. The color change was higher for the specimens immersed in sebum than that corresponding to simulated perspiration. According to statistical analysis, all measured properties changed significantly after immersion in simulated perspiration and in sebum. Moreover, mathematical models reveal major alterations as well, which were introduced through their constants. Thus, the hypothesis investigated was rejected. Conclusions: Significant changes were observed in all the examined elastomers. The elastomers were aged for a period, which simulates 1.5 years of clinical service. Within the limitation of this study, concerning the mechanical behavior and mostly the color changes, sebum and perspiration greatly affect the examined elastomers.

Surface roughness of pigmented and non-pigmented maxillofacial silicone elastomer before and after artificial aging

The impact of zirconium dioxide nanoparticles on the color stability of artificially aged heat-polymerized maxillofacial silicone elastomer

Biocompatibility profile of aged pigmented and non‐pigmented silicone elastomer for combined maxillofacial defects

Assessment of the color stability of two silicone elastomers for maxillofacial prostheses upon exposure to cold beverages

Effect Of Surface Modification Of Titanium Dioxide On The Uv-C Aging Behavior Of Silicone Rubber

Evaluation of the color stability of three maxillofacial silicone materials after exposure to beverages: An in vitro study

Color Stability, Physical Properties and Antifungal Effects of ZrO2 Additions to Experimental Maxillofacial Silicones: Comparisons with TiO2

Effect of Particle Size of Nano-Oxides on Color Stability and Mechanical Properties of Maxillofacial Silicone Elastomers: An In Vitro Study

A Systematic Review on Maxillofacial Prosthesis with Respect to Their Color Stability

Evaluation of the Colour Stability and Surface Roughness of Polymethylmethacrylate and Indirect Composites With and Without Ageing: An In-Vitro Study

In situ study of the effect of endogenous and exogenous agents on color stability, hardness, and surface roughness of an elastomer for facial prostheses

Color Modifications of a Maxillofacial Silicone Elastomer under the Effect of Cigarette Smoke

Influence of Weather on Hardness and Surface Roughness of Maxillofacial Elastomeric Materials

Effects of Accelerated Aging on Color Stability and Surface Roughness of a Biomimetic Composite: An In Vitro Study

Comparative Analysis of Modern 3D-Printed Hybrid Resin-Ceramic Materials for Indirect Restorations: An In Vitro Study

Effects of storage in simulated skin secretions on mechanical behavior and color of polydimethylsiloxanes elastomers

Effect of nanoparticles on color stability and mechanical and biological properties of maxillofacial silicone elastomer: A systematic review

Surface roughness of different types of resin composites after artificial aging procedures: an in vitro study

Effect of Bisoctrizole on Ultraviolet (UV) Absorption Properties of Silicone and Effect on Surface Roughness - An In Vitro Study

The Effect of Cigarettes Smoke on the Color and Properties of a Silicone for Maxillofacial Prostheses

Effects of post-polymerization conditions on color properties, surface roughness, and flexural strength of 3D-printed permanent resin material after thermal aging