Abstract:Neutronics calculations and analysis' of ITER test blanket module lay the foundation for the design, construct and experiment of ITER. In this paper, the realistic 3D neutronics calculations of the dual functional lithium lead-test blanket module (DFLL-TBM) have been carried out by means of the 3D MOC code and the SPN code, which are both deterministic methods and developed by NECP lab, adopting the multi-group nuclear data library FENDL/MG-2.1. The main features of the TBM nuclear response are assessed, paying a particular attention to the neutron flux and tritium production rate.The 3DMOC code([8]) is a coupling a 3D method of characteristics (MOC) to the common geometry module. It could calculate the flux throughout three-dimensional systems by the MOC, which has been proved a very flexible and effective method for the neutron transport calculation in a complex geometry. In this code, a modular ray tracing technique is adopted to reduce the amount of the ray tracing data and the Coarse Mesh Finite Difference (CMFD) acceleration method is employed to save computing time, which could well solve the difficulties when applying MOC in three-dimensional geometries([1]).The SPN code is another three-dimensional Boltzmann transport equation calculation code. The simplified P-N method is used to treat the directional variable, and the Nodal method treats the spatial variable. Consequently, this code has an advantage in shorting computing time when applied to big geometry problems.Considering the big geometry of DFLL-TBM and the large number of the cross sections of nuclear data library FENDL/MG-2.1([2]), a two-step approach is adopted Firstly, the DFLL-TBM is dissected into some typical independent parts. 3D calculations are performed on these parts respectively with 3D MOC code and FENDL/MG-2.1([2]) library to obtain the detailed heterogeneous flux distribution. Then the homogenization is carried out to calculate the average homogeneous cross sections, followed by the use of homogeneous cross sections to calculate the flux distribution throughout the DFLL-TBM with SPN code.The results obtained are herewith presented and critically discussed

1 IT / P 2-7 Design Concept and Testing Strategy of a Dual Functional Lithium Lead Test Blanket Module for ITER and EAST

The Dual Functional Lithium Lead Test Blanket Module and the Testing Strategy for ITER

Structural Design and Fabrication of Dual-Functional Lithium Lead Test Blanket Module for ITER

Preliminary Design of Lithium Lead Test Blanket Module for the Chinese Experimental Advanced Superconducting Tokamak

Interface design between dual functional lithium lead-test blanket system and ITER equatorial port

Preliminary Thermal-Hydraulic and Safety Analysis of China DFLL-TBM System

Thermal hydraulic design and analysis of the dual-function lithium-lead test blanket module for ITER

Current Progress of Chinese HCCB TBM Program

Preliminary Design for a China ITER Test Blanket Module

Evaluation of electromagnetic forces on Chinese Dual Functional Lithium Lead Test Blanket Module in ITER

Calculations Of The Dual Functional Lithium Lead-Test Blanket Module For Iter With Three-Dimensional Deterministic Method

Neutronic calculations of the China dual-functional lithium–lead test blanket module with the parallel discrete ordinates code Hydra

Preliminary Safety Analysis For The Chinese Iter Dual Functional Lithium-Lead Test Blanket Module

New Progress on Design and R&D for Solid Breeder Test Blanket Module in China

Updated Thermal-Mechanical Analysis of DFLL-TBM for ITER

Overview of Design and R&D of Solid Breeder TBM in China

Progress in design and study of ITER test blanket modules

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

The Preliminary Design of the Helium Cooling System for the Dual-Functional Lithium Lead Test Blanket Module for ITER

Analysis and design of neutronics for an ITER test blanket module

Safety Analysis on Dual-functional Lithium Lead Test Blanket Module With RELAP5