Abstract:An SMA (shape memory alloy) is a functional material with a unique property known as the shape memory effect, or superelasticity. Microscopically, the mechanical actuation of this effect is based on reversible transformation between different crystal phases. To clarify the atomistic mechanism in SMA, we perform molecular dynamics simulation (MDS) of phase transformations for a Ni-Ti alloy, a typical alloy used for engineering SMAs. EAM potential, which can produce both B2 and B19' structures (stable crystal phases of Ni-Ti), is adopted to model the interatomic interaction of the nickel and titanium atomic systems. Two different-sized MDS models are constructed with unit cell structures of B2 phase. These structures are surrounded by free surfaces and constrained regions so as to be subjected to uniaxial tensile loading. A series of reversible processes likely to occur in SMA, including loading, unloading, heating, and cooling, is reproduced by corresponding stages of the MDS. Phase transformation is thought to be observable by detecting the local interatomic distances and bonding angles peculiar to B19' structure (martensite). During tensile loading simulations, the martensite crystal structure is always observed, having transformed from the B2 structure. At a large strain, models exhibit a rapid propagation of local lattice distortions accompanied by the formation of martensite. In unloading simulations, the larger model contains relatively less martensite than the smaller model. The discrepancy with regards to model size may depend on a different degree of constraint strength. Reverse transformation (from B19' to B2) occurs mainly in the subsequent heating stage, in which the stress is observed to increase under constant residual strain.

The Microstructure and Martensitic Transformation Behaviors in Ti-Ni-Hf -X (ag, Sn) High Temperature Shape Memory Alloys

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Microstructure of Stress-Induced Martensite in a Ti–Ni–Hf High Temperature Shape Memory Alloy

The Tensile Behavior of Ti36Ni49Hf15 High Temperature Shape Memory Alloy

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Microstructure and martensitic transformation of Ti49Ni51−Hf high temperature shape memory alloys

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Microstructure and martensitic transformation of Ti49Ni51−xHfx high temperature shape memory alloys

Mechanisms of stress-induced martensitic transformation and transformation-induced plasticity in NiTi shape memory alloy related to superelastic stability

Recent Development of TiNi‐Based Shape Memory Alloys with High Cycle Stability and High Transformation Temperature

Effect of Ti/Ni and Hf/Zr ratio on the martensitic transformation behavior and shape memory effect of TiNiHfZr alloys

Observation of Phase Transformation and Structural Analysis for Ni-Ti Alloy by Molecular Dynamics Simulation

HREM Study on the Intervariant Structure of Ti-Ni-Hf B19′ Martensite

Microstructural development inside the stress induced martensite variant in a Ti–Ni–Nb shape memory alloy

Microstructure and Martensitic Transformation of NiTiHfSc High Temperature Shape Memory Alloys

Experimental Investigation on the Mechanical Instability of Superelastic NiTi Shape Memory Alloy

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy

Microstructure, Martensitic Transformation And Superelasticity Of T1(49) (6)N1(45 1)Cu(5)Cr(0 3) Shape Memory Alloy

Characteristics of Stress-Induced Transformation and Microstructure Evolution in Cu-based SMA

Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moiré Interferometry