Abstract:Surface integrity is important to improve the fatigue property of components. Proper selection of the cutting parameters is extremely important in ensuring high surface integrity. In this paper, ball end milling of TC17 alloy has been carried out utilizing response surface methodology. The effects of cutting speed, feed per tooth, cutting depth, and cutting width on the surface integrity characteristics, including surface roughness ( R a ), surface topography, residual stress, and microstructure were examined. Moreover, predictive metamodels for surface roughness, residual stress, and microhardness as a function of milling parameters were proposed. According to the experimental results obtained, the surface roughness increases with the increase of milling parameters, the ( R a ) values vary from 0.4 μm to 1.2 μm along the feed direction, which are much lower compared to that along the pick feed direction. The surface compressive residual stress increases with the increase of feed per tooth, cutting depth, and cutting width, while that decreases at high cutting speed. The depth of the compressive residual stress layer is mostly in the range of 25–40 μm. The milled surface microhardness represents 6.4% compared with the initial state; the work-hardened layer depth is approximately 20 μm. Moreover, plastic deformation and strain streamlines are observed within 3 μm depth beneath the surface. The empirical model of surface integrity characteristics is developed using the results of ten experiments and validated by two extra experiments. The prediction errors of the three surface integrity characteristics are within 27%; the empirical model of microhardness has the lowest prediction errors.

A Surface Roughness Prediction Model for High-speed Milling

An Intelligent Prediction of Surface Roughness on Precision Grinding

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Surface Characteristics and Roughness Prediction of TC4 Titanium Alloy in High Speed Grinding

Simulation of Chip Formation in High-Speed Hard Machining

Precision Prediction of Surface Roughness in High Speed Peripheral Milling Ti6Al4V Alloy

A surface quality prediction model considering the machine-tool-material interactions

Modeling and Optimization of High-Grade Compacted Graphite Iron Milling Force and Surface Roughness Via Response Surface Methodology

3D bevel surface topography analysis and roughness prediction by considering the cutter-workpiece dynamic interaction

Experimental analysis and modeling of cutting power model

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Intelligent Prediction for Surface Roughness of Cnc Surface Grinding Machine Tool Based on Bayesian Network

Prediction model of surface integrity characteristics in ball end milling TC17 titanium alloy

Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718

Prediction and Control of Surface Roughness for the Milling of Al/SiC Metal Matrix Composites Based on Neural Networks

Prediction of Surface Roughness in Gas-Solid Two-Phase Abrasive Flow Machining Based on Multivariate Linear Equation

Mathematical modeling and experimental verification of surface roughness in micro-end-milling

Surface Roughness and Topography Analysis in Precision Milling of 3J33 Maraging Steel

Surface roughness predictive modeling: neural networks versus regression

The prediction of 3D surface topography in a high-speed micro-milling process with aerostatic spindle