Abstract:Since the western region of China, which is typical of extraordinary resource endowments, has gradually emerged as the major mining zone in China, the mining of thick coal seams and roadways with coal-rock composite roof have become more and more common in this region. However, it is extremely difficult to realize safe and effective maintenance and control of such roadways due to the differences in natural endowments of coal-rock masses. With the roadway with coal-rock composite roof of Hulusu Coal Mine in western China as the engineering background, experiment research on large-scale similarity model was conducted through comprehensive measures such as the pneumatic loading system, the surrounding rock stress monitoring system, the roadway deformation monitoring system, the bolt load monitoring system, and the displacement field monitoring system in this paper. According to the results of the experiment, the control effects of the three support systems on the roadway with coal-rock composite roof were significantly different. When the single support of short anchor bolts was applied, the comparatively low initial anchor-hold failed to constrain the initial micro deformation of the roof. Consequently, wide-range fractures of the roof were triggered at a loading pressure of 0.8 MPa. In the meanwhile, the deep surrounding rocks witnessed a downward inflection point in stress, accompanied by the possibility of the collapse of the thin-layer anchorage zone at any time. As for the support combining both short anchor bolts and long anchor cables, though a reinforced effect on the bolt anchorage zone could be achieved with the help of the cables, the active reinforcement capacity of the bolt was limited. The bolt anchorage zone was the first to be damaged at a loading pressure of 0.9 MPa, which would subsequently affect the effective bearing capacity of the deep surrounding rocks. In the application of the single support of high-strength long anchor bolts, the long bolts with high pre-tightening force were able to lock multiple groups of coal-rock strata to form a thick-layer anchorage bearing structure capable of withstanding a load as high as 1.0 MPa. The crash and collapse of the coal wall eventually caused the subsidence of the roof. Based on the intense dynamic load experiment and the feedbacks of engineering application outcomes in the field, it was concluded that the high-pretension thick-layer (HPTL) anchoring technology can effectively constrain the deformation of roadways with coal-rock composite roof with favorable application outcomes.

Rapid Development of Coalmine Bolting in China

Laboratory and field investigations of different bolting configurations for coal mine roadways in weak coal strata

Theory, technology and application of grouted bolting in soft rock roadways of deep coal mines

Application of high pretension yieldable bolt-anchor support for gateway with new cross-section in a deep coal mine

Practices, experience, and lessons learned based on field observations of support failures in some Chinese coal mines

High Prestress Anchor Bolt Support Technology for Full Coal Roadway of Thick Coal Seam and Example Analysis

Failure Characteristics and Stability Control of Bolt Support in Thick-Coal-Seam Roadway of Three Typical Coal Mines in China

Optimization of face flexible bolting and grouting technology for longwall face support under difficult geological conditions

Full-Stress Anchoring Technology and Application of Bolts in the Coal Roadway

Multi-scale experimental study on the failure mechanism of high-strength bolts under highly mineralized environment

Anchorage performance of a new rebar bolt under different surrounding rock strength and borehole depth

Application of Bolt Support Technique in Pangzhuang Coal Mine

Optimization of small coal pillar width and control measures in gob-side entry excavation of thick coal seams

Non-repeated advance support technology: a fully mechanized caving face in extra thick coal seam of North China

Study on enhancing depth and efficiency of drilling in soft and hard combined outburst coal seam

Cooperative Control Mechanism of Long Flexible Bolts and Blasting Pressure Relief in Hard Roof Roadways of Extra-Thick Coal Seams: A Case Study

Analysis of the Support Method for Deep Road with High Stress Level Dynamic Pressure

Study on Advanced Anchor - grouting Support of Mining Roadway in Close Lower Coal Seam

Model experiment research on HPTL anchoring technology for coal-rock composite roof in deep roadway

Failure Mechanism and Control Technology of Thick and Soft Coal Fully Mechanized Caving Roadway under Double Gobs in Close Coal Seams

Tensile Bearing Performance and Mechanical Transfer Mechanism of Coal-Rock Composite Anchor Bodies Under Different Height Ratios of Rock to Coal