Abstract:Boron is an essential solute element for improving the grain boundary strength in several high temperature metallic alloys especially in Ni- and Co-base superalloys although the detailed strengthening mechanisms are still not well understood. In superalloys, boron leads to the formation of borides and precipitate depleted zones around the grain boundaries and alters the bond strength among the grains directly. In this paper, we explore in detail the role of the boron content in ternary γ/γ′ Co-9Al-9W alloys. Local as well as bulk mechanical properties were evaluated using nanoindentation and compression testing and correlated to near-atomic scale microstructure and compositions obtained from electron microscopy and atom probe tomography. The alloy variant with low B content (0.005 at.% B) reveals an increase in yield strength at room temperature and 600 °C and atom probe tomography investigations show that solute B segregates to the grain boundaries. However, in the bulk B exclusively partitions to the γ′ phase. Additionally, the γ′/γ′ grain boundaries are depleted in W and Al with the concentration locally shifted towards the γ composition forming a very thin γ layer at the γ′/γ′ grain boundaries, which supports dislocation mobility in the γ′/γ′ grain boundary region during deformation. Higher content of B (0.04 at.% B) promotes formation of W-rich borides at the grain boundaries that leads to undesirable precipitate depleted zones adjacent to these borides that decrease the strength of the alloy drastically. However, it was also found that a subsequent annealing heat treatment eliminates these detrimental zones by re-precipitating γ′ and thus elevating the strength of the alloy. This result shows that, if a precipitate depleted zone can be avoided, B significantly improves the mechanical properties of polycrystalline Co-base superalloys by strengthening the γ′ phase and by improving grain boundary cohesion.

The effect of B addition on charge distribution in Co3Ti

The effect of boron on charge density distribution in Ni3Al

Effects of Boron Addition on the Microstructure and Mechanical Properties of γ′-Strengthened Directionally Solidified CoNi-Base Superalloy

The effect of boron on the electronic structure of grain boundaries in Ni3Al

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

The Determination of Degree of Order of Nearby Grain Boundary in the Ni3A1 Family

Effect of boron on the structural stability, mechanical properties, and electronic structures of γ′-Ni3Al in TLP joints of nickel-based single-crystal alloys

Effect of carbon doping on the structure and superconductivity in AlB2-type (Mo0.96Ti0.04)0.8${(\text{Mo}_{0.96}\text{Ti}_{0.04})}_{0.8}$B-2

Effect of Boron Doping on Microstructure of Directionally Solidified Ti–46Al–2Cr–2Nb Alloy

On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys

Effects of Boron on Microstructure Evolution and Mechanical Properties in Ti46Al8Nb2.6C0.8Ta Alloys

Effects of Carbon and Boron Addition on Microstructure and Mechanical Properties of TiAl Alloys

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

The effect of boron addition on the deformation behavior and microstructure of β-solidify TiAl alloys

Effect of Carbon Doping on the Structure and Superconductivity in AlB2‐type (Mo0.96ti0.04)0.8${(\text{mo}_{0.96}\text{ti}_{0.04})}_{0.8}$b2

Mechanism of Grain Refinement Effect of Boron Addition on Γ-Tial Based Alloys

Effect of Fe and Co on the electronic structure of (110) martensite twin boundary in Ni2MnGa alloy

First-principles studies of effects of interstitial boron and carbon on the structural, elastic, and electronic properties of Ni solution and Ni3Al intermetallics*

Formation and Kinds of Boride on Microstructure Evolution and Mechanical Properties in Ti47.5Al2.0Cr2.0NbxB Alloys

Effect of Nb and B on the Precipitation Behaviors in Al-Ti-Nb Balanced Ratio Ni-Based Superalloy: A Phase-Field Study

Effect of Boron on Microstructure and Mechanical Properties of Cast Ti-44al6-Nb Ingots