Abstract:Compared with traditional valves control system, independent metering valves control system (IMVCS) broke down the mechanical coupling of the meter-in and meter-out orifices, so that it increased the control degrees of freedom. Usually two spools were used to determine one actuator's state in IMVCS. The key difficulty was to coordinate the opening displacement of two spools that can output pressure and flow according to control strategy. This paper introduced the components and working principle of IMVCS. A flow and pressure coupling controller was designed to control both velocity of piston and pressure in each chamber. A SYS/BIOS based embedded operating system was adopted for fast response. Large set of sensors can be integrated which their amplifying circuits were designed on board. The IMVCS used dual close loop control to monitor and modify pressure and flow in real-time. Four types of threads were provided to schedule tasks. The real-time multitasking control software was developed. To verify the control strategy and PCB'A, a preliminary experiment showed the results of step response and sine signal tracking that two spools worked by onboard controller.

MCGS and iCAN Based on Distributed Monitoring System

Monitor System of Energy-Feedback Electronic Load Based on CAN Bus and LabVIEW

Study and Implementation of Power Plant Monitoring System Based on Intranet

Research and Development of Comprehensive Monitoring and Management Platform for Substation

Application of MCGS Configuration Software in the Monitoring and Control System of Boiler Coal Consumption

PC-PLC Based Real-time Monitoring and Control System of Marine Gravity Meter

Auto Control System Design of the Heat-exchanging Station with Rockwell Micro2080 and MCGS

Research on the plant energy monitoring system based on CAN bus

Integrated Mnitoring and Control System Software Design of Greenhouse Controllable Conditions Based on CAN

Design And Application Of Multi-Sources Information Monitoring System For Bioreactor

Design of Flow and Pressure Coupling Controller for Independent Metering Valves Control System

Design Of A Mine Methane Monitoring System Based On Vc & Can Bus

Remote Mine Methane Monitoring System Based on CAN Communication

Monitoring and Control System of Remote Measure for Bulk Plant

General Alarming and Monitoring System Design Based on Dual-MCU

Monitoring system for CO based on CAN bus

On-line Monitoring Device in Substation Based on the Technology of CAN Bus and ARM Microprocessor

The Application of CANopen Protocol in Monitoring and Control System of Greenhouse Microclimate

State Self-Adaptive Monitor And Control System For 6kv/1600 Kva Adjustable-Speed Drive

On board data monitoring system for fuel cell vehicle

Design of Measurement & Control System for Blast Fan Test Station Based on CAN and PLC