Abstract:Phenol degradation was studied in a novel electrochemical system with TiO2/activated carbon fiber as anode and graphite as cathode. The removal of phenol was investigated in terms of various parameters namely: cathode and anode gap, pH, current density, initial phenol concentration and addition of Na2SO4. At the same time, percentages of phenol degradation and COD removal were observed at different electrodes. The results showed that, at the phenol concentration of 100 mg/L, cathode and anode gap of 2 cm, current density of 7.14 mA/cm(2), solution pH 6.20 and 0.0750 mol/L Na2SO4, degradation of 83.26% phenol and removal of 47.03% COD after 1 h electrolysis can be achieved with TiO2/ACF-graphite as anode, while 67.72% phenol and 35.78% COD achieved with ACF/graphite as anode. Under the same conditions mentioned above, no phenol can be detected in 105 min at the initial phenol concentration of 10 mg/L with TiO2/ACF-graphite as anode. The electrochemical oxidation reaction of phenol obeyed pseudo-first order kinetic. The mass adsorbed hydroxyl radicals were generated on the TiO2/ACF electrode due to its three-dimensional space, high oxygen evolution potential and the catalysis of TiO2. With the formation of hydroxyl radicals, the phenol was oxidized to produce hydroquinone, pyrocatechol and benzoquinone during electrochemical process. The concentrations of these three aromatic compounds achieve peak values after 3 h, 2 h and 1 h, respectively. Then, they gradually diminished and were degraded to form ring-opened products such as formic and maleic acids, which were oxidized to CO2 and H2O finally. (C) 2014 Published by Elsevier Ltd.

Effect of degradation of phenol in water by direct high-voltage discharge

Degradation Of Phenol In Aqueous Solution By High-Voltage Pulsed Corona Discharge

Degradation of Aqueous Phenol by High Voltage Pulsed Corona

Degradation of Organic Contaminants in Water by Pulsed Corona Discharge

Preliminary study of destruction of acetophenone in water by high voltage pulse discharges

Effect of various gases and chemical catalysts on phenol degradation pathways by pulsed electrical discharges.

Degradation of O-Cp by Pulsed High Voltage Discharge in Water

Phenol Degradation in an Electrochemical System with TiO2/activated Carbon Fiber As Electrode

Degradation of phenol using a combination of granular activated carbon adsorption and bipolar pulse dielectric barrier discharge plasma regeneration

Degradation of Phenol in Aqueous Solutions by Gas–Liquid Gliding Arc Discharges

Degradation of Acetophenone in Water by Pulsed Corona Discharges

DEGRADATION OF PHENOL WASTEWATER BY DUAL-FREQUENCY ULTRASOUND TECHNOLOGY

[Degradation of 4-Chlorophenol in Aqueous Solution by High-Voltage Pulsed Discharge-Ozone Technology].

Phenol degradation by a hybrid gas-liquid discharge reactor with digital-analog mixed control

Phenol Degradation by TiO2 Photocatalysts Combined with Different Pulsed Discharge Systems.

The important role of the hydroxy ion in phenol removal using pulsed corona discharge

Degradation Performance of 4-Chlorophenol as a Typical Organic Pollutant by a Pulsed High Voltage Discharge System

Plasma Chemical Degradation of Phenol in Solution by Gas–liquid Gliding Arc Discharge

Degradation of phenol by UV light-assisted electrocatalytic treatment

Effect of the presence of inorganic anions on the degradation of phenol by dielectric barrier discharge plasma combined with RGO-TiO2

Phenol degradation by TiO2 photocatalytic technology