Abstract:The C–Hf–Ti, C–Hf–W and C–Hf–Ti–W systems have been assessed by means of the CALPHAD (CALculation of PHAse Diagram) approach. All of the experimental phase diagram and thermodynamic data available from the literature are critically reviewed. According to the available experimental data, no ternary or quaternary compound has been found in these systems. The liquid is modeled as a substitutional solution phase, while the solid solution phases including βHf, αHf, βTi, αTi, W, HfC1-x, TiC1-x, WC1-x, WC, W2C and HfW2 are described by sublattice models. The modeling of C–Hf–Ti and C–Hf–W systems covers the whole composition range. A set of self-consistent thermodynamic parameters for the C–Hf–Ti and C–Hf–W systems are then obtained. Comprehensive comparisons between the calculated and experimental data show that the experimental information is satisfactorily accounted for by the present thermodynamic description. The liquidus projection and reaction scheme of the C–Hf–Ti and C–Hf–W systems are generated by using the present thermodynamic parameters. Due to limited experimental data, the simple Hf–Ti–W system is extrapolated from its sub-binary systems. Based on the present work and the previous assessment of the C–Ti–W system, a thermodynamic description of the quaternary C–Hf–Ti–W system is extrapolated, and the experimental phase equilibria can also be well reproduced by the present thermodynamic modeling. For the first time, the miscibility gap of the quaternary cubic carbides is calculated in the quaternary C–Hf–Ti–W system. A high potential in industrial applications such as in bulk cemented carbide, cermet cutting tools and hard-coatings is discussed mainly in terms of the miscibility gap.

Thermodynamic Description Of The System Ti-Cr-C

Experimental Investigation and Thermodynamic Assessment of the Cr–Ti System

Thermodynamic Description and Simulation of Solidification Microstructure in the Co-Ti System

Experimental determination of the liquidus projection of the B-Cr-Ti system

Thermodynamic Modeling of the Ta–Mo–C Ternary System

Experimental Investigation and Thermodynamic Assessment of Phase Equilibria at the Ti-Mn side in the Ti-Mn-Mo Ternary System

Thermodynamic Modeling of the B-Ti-Zr System over the Whole Composition and Temperature Ranges

Experimental Investigation and Thermodynamic Calculations of the Co-Fe-Ti System

Thermodynamic Calculation of Phase Equilibria in the C-Mo-Zr System

Thermodynamic Modeling of the Ni–Nb–V Ternary System

Thermodynamic Description and Quaternary Miscibility Gap of the C–Hf–Ti–W System

Experimental study and thermodynamic modeling of the Al-Co-Cr-Ni system

Experimental Investigation of Phase Equilibria in the Ti-Cr-V System at 1000–1200 °C

PHASE EQUILIBRIA INVESTIGATION OF BINARY, TERNARY, AND HIGHER ORDER SYSTEMS. PART 1. THE PHASE DIAGRAMS OF THE SYSTEMS Ti-Nb-C, Ti-Ta-C, AND Ti-Mo-C

First-principles calculations, experimental study, and thermodynamic modeling of the Al-Co-Cr system

Thermodynamic Description of Phase Equilibria in the C–Mo–W–N Quaternary System

Thermodynamic Assessments of Ti-Al, Ti-Fe, and Ti-Al-Fe Systems with Four-Sublattice Description of Ordered Body-Centered Cubic Phase and Density Functional Theory Data

Phase equilibria thermodynamics and solidified microstructure in the Ag-Cr-Zr system

Experimental Investigation and Thermodynamic Assessment of the Mo–Ni–Zr Ternary System

Thermodynamic Assessment of the C–Nb–V Ternary System over the Whole Composition and Temperature Ranges

Evaluation of the tantalum-titanium phase diagram from ab-initio calculations