Abstract:Large-scale, densely distributed fiber Bragg grating (FBG) arrays have a wide range of applications in industrial safety surveillance. Due to the limitation of inscription pulse-width, most grating interrogators have difficulties distinguishing each grating when the spacing between adjacent gratings reduces to specific small values. Multiple gratings within a fiber section are generally deemed as a single sensing element, and their superposed reflection spectra are acquired for necessary sensing information. The challenge is that serious crosstalk exists in multiple gratings caused by the accumulation of sidelobes from numerous reflections. Such crosstalk, indeed, can be eliminated when the sidelobe suppression ratio (SLSR) is kept high, which has been a long-term difficulty in such systems. In this work, we propose and experimentally demonstrate a novel and simple online fabrication technique for writing apodized fiber Bragg grating (AFBG) arrays during fiber drawing by simply rotating a focusing cylindrical lens for modified pulse intensities. At four degrees rotation angle, the fabricated AFBG has good performance and consistency with full width at half maximum (FWFH) of 0.088 nm, and the SLSR on the longwavelength side is maintained as high as 20.8 dB. Experimental results further prove that using this fiber-based system, a hot spot of 10 cm size can be well perceptive over one-km fiber length, and the minimum measurable temperature change is 6 celcius. This work clearly addresses a reliable and potential method for the online fabrication of AFBG arrays with suppressed sidelobe-induced crosstalk.

Non-minimum Phase Reconstruction from Amplitude Data in Fiber Bragg Gratings Using an Adaptive Simulated Annealing Algorithm

Simulation and Reconstruction for Nonuniform Strain Profile of Fiber Bragg Grating Sensor

Adaptive Simulated Annealing Algorithm for the Fiber Bragg Grating Distributed Strain Sensing

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Improving the Performance of FBG Sensors in a WDM Network Using a Simulated Annealing Technique

A Method of the Synthesis of Fiber Bragg Grating Array without Any Damage

Non-uniform strain field reconstruction of FBG using an adaptive Nelder–Mead algorithm

FBG Sensor Interrogation Based on RF Signal Measurement

Fiber Bragg Grating Dynamic Demodulation Based on Non-Equilibrium Interferometry

Fabrication and Sensing Application of Phase Shifted Bragg Grating Sensors

Simulation of Fiber Bragg Grating Using Different Physical Parameters for Investigating the Effectiveness on Strain Sensor Measurements

Drawing-tower Inscription of Apodized Fiber Bragg Grating Arrays Using a Rotated Focusing Cylindrical Lens

An apodized optimization methods for phase shift sampled fiber Bragg grating

Mathematical Modeling of π-Phase-Shifted Fiber Bragg Grating and its Application for Strain Measurement in Epoxy Resin Cantilever Beam

Application on Demodulation of FBG Sensing Signals using Phase Detection Algorithm of Intake and Exhaust

Simultaneous Strain and Temperature Measurements with Fiber Bragg Grating Written in Novel Hi-Bi Optical Fiber

Inverse design and optimization of aperiodic multi-notch fiber Bragg grating using neural networks

Demodulation of the multi-peak fiber Bragg grating sensor based on partial wavelength scan

Kalman filter for dynamic and static measurement of fiber Bragg grating

Efficient reconstruction scheme with deep neural network for highly compressive sensing of fiber Bragg grating spectrum

Semiconductor optical amplifier fiber-ring laser for FBG dynamic strain sensing with an adaptive two-wave mixing demodulator