Abstract:Thick-coal-seam with complex structures and thick-hard roof in the initial mining phase pose various challenges, including a long weighting interval, strong rock pressure, poor top coal caving performance (TCCP), and significant coal loss. These problems directly affect the safety and efficiency of the mining operations. This study employs the principles of elastic thin plates and ellipsoidal bodies to unravel the formation mechanism of strong rock pressure in thick-hard roof and the influence of parting on the TCCP. In addition, a hydraulic fracturing technique is proposed for safe-efficient recovery during the initial mining phase. The reliability of this technique is verified through numerical simulations and field experiments. The research findings reveal the following. (1) The primary causes of strong rock pressure in the mining face are attributed to a long weighting interval and wide collapse range of the main roof, and the weighting interval is primarily influenced by the thickness and tensile strength of the main roof. (2)The key factor affecting the TCCP is the cantilever beam structure formed by the fracture of the thick-hard parting, as it intersects the ellipsoidal body during coal caving. The simultaneous fracturing of both the top coal and roof can reduce the weighting interval on the working face. This process effectively decreased the strength of the thick-hard parting within the top coal, while simultaneously enhancing its load strength and eliminating the cantilever structure resulting from the parting fracture. It not only reduces the first weighting intensity but also promotes the early and proper coal release, thereby enhancing the TCCP and ensuring safe-efficient mining during the initial mining phase. (3) Aiming at the difference in the strengths of the top coal and roof, a graded hydraulic fracturing technique and system were proposed. Fracturing boreholes with a diameter of 60 mm, spacing of 10 m, and height of 20.85 m, which can economically and effectively ensure the fracturing results. Field applications have demonstrated that fractured coal and rocks in fracturing areas exhibit well-developed fractures. During the initial mining phase, the weighting interval in the working face was reduced by 20 m, resulting in a decrease in the overburden pressure and 26.9% reduction in the lumpiness of the top coal. Additionally, the recovery rate increased by 31.19%.

Technological Research on Preventing Equipments from Sliding and Falling at High Inclined Fully Mechanized Coal Face

Research on key technologies of intelligent working face in coal

Mining Height Automation Equipment Supporting Technology in Fully-mechinzed Coal Winning Caving Face

Research on the Mechanism and Control Technology of Coal Wall Sloughing in the Ultra-Large Mining Height Working Face

Research on the Laws of Strata Behavior in the Large Mining Height Fully-mechanized Face and Control Technologies for Surrounding Rocks

Present situation of fully mechanized mining technology for steeply inclined coal seams in China

Research on Roadway Stability Control for Fully Mechanized Caving Face of Large Angle Inclined Mining

Research on an Intelligent Mining Complete System of a Fully Mechanized Mining Face in Thin Coal Seam

An Effective Method for Longwall Automation in Thin Coal Seam.

Failure mechanism and 3D physical modeling test of coal face pyramid sliding in steeply inclined working face: A case study

Coal Wall Spalling Mechanism and Grouting Reinforcement Technology of Large Mining Height Working Face

Development And Application Of Mechanized Control Equipment For Roadway Floor Heave In Coalmine

Law of respirable dust pollution induced by cutting-advancing support in a fully mechanized mining face and spatial stereoscopic dust control and removal technology

Research Status and Method Progress of Dust Prevention and Control Technology for Fully Mechanized Heading Face in Coal Mine

Roof leakage mechanism and control technology study of fully mechanized large mining height mining face of thin bedrock seams

Characteristics of Strata Behavior and Differentiated Control of Fully Mechanized Mining Working Face with Abnormal Roof

Safety and high-recovery mechanisms and application research for initial mining of thick-coal-seam with complex structure and thick-hard roof

Coal and rock dynamic disaster prevention and control technology in the large mining face of a deep outburst mine

Study on roof breaking mechanism and support stability of steeply dipping seam and large mining height

Multifield Environmental Analysis and Hazards Prevention of Steeply Inclined Deep Coal Mining

Study on Time-Dependent Failure Mechanisms and CBAG Differential Support Technology of Roadway in Steeply Inclined Coal Seam