Abstract:Pre-deposition of powdered activated carbons (PACs) is an effective method to improve the permeate quality of gravity-driven membrane (GDM) system but always with a limited or even negative effect on its fouling behavior. PAC dosing strategies play dominant roles on the fouling of microfiltration and ultrafiltration membranes under constant flux mode, owing to the alteration of PAC-membrane interactions. Hence, how to further increase the membrane flux in the PAC-GDM system needs more investigation. In this study, the effects of PACs on the fouling by treated domestic wastewater were evaluated during GDM filtration using three different PAC dosing strategies: pre-depositing PACs onto membrane surfaces, and mixing PACs with bulk feeds in reactors totally before filtration and mixing PACs with bulk feeds in reactors periodically during filtration. PACs in three dosing modes all improved the removal of organics, but showed conflict effects on the fouling. Unlike mixed PACs increasing the final flux by more than two times than that obtained in the control system, pre-deposited PACs showed a dramatically negative effect on the flux development with a final value decreased by 75.0%. As demonstrated by the scanning electron microscopy images of biofilm structures and the contents of dissolved organic carbon and adenosine triphosphate in reactors, pre-deposited PAC layer aggravated the accumulation of organics and microorganisms with the formation of a stratified and compact structure, which hindered their back-transport to the bulk water. However, mixed PACs induced the formation of a uniform and porous biofilm, which favored the retained organics and microorganisms migrating back into concentrated waters, especially for pre-mixed PACs. This study links PAC dosing strategies, physical structures of biofilms and spatial distributions of organics and microorganisms, with practical relevance for the hydraulic performance of GDM systems, hopefully leading to a wider application of PAC-GDM systems in wastewater treatment.

The Application of a New Microparticle Retention and Drainage System in Mixed Bamboo and Hardwood Pulp Furnishes

Kaolin Filling and Hand-Sheet Property in Dual Polymer Retention System

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

Study of Sizing with Anionic Rosin Emulsion of the Recycled Paper Pulp

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Mechanical and thermal properties of sodium silicate treated moso bamboo particles reinforced PVC composites

Application of CPAM/Sepiolite Velvet Retention System in Base Paper of Paper-Based Friction Material

Effect of Sheet Properties of Cellulosic Polyglycidyl Methacrylate-Grafted Fibers in a Cationic Polyacrylamide/SiO2/Anionic Polyacrylamide Retention Aid System

Application of Anionic PAMAM Dendrimers in Organic Retention and Drainage System

Synthesis of an Eco-friendly Bamboo Cellulose-grafted-ployacrylamide Flocculant and Its Flocculation Performance on Papermaking Wastewater

Effect of Pretreatments on the Enzymatic Hydrolysis of High-Yield Bamboo Chemo-Mechanical Pulp by Changing the Surface Lignin Content

Reinforcing Paper Strength by Dual Treatment of a Cationic Water-soluble Polymer and Cellulose Nanofibril

Study on the interactions between dissolved and colloidal substances under the treatment of fixing agents in papermaking

The changes of bamboo pulping waste water residuals in biological treatment process

Extending the limits of using chemithermomechanical pulp by combining lignin microparticles and hot-pressing technology

EFFECT OF FIXING AGENTS ON THE AMOUNT OF WET END CHEMICALS ADSORBED ONTO A BLEACHED CHEMITHERMOMECHANICAL PULP

Improving Mechanical Strength and Water Barrier Properties of Pulp Molded Product by Wet-End Added Polyamide Epichlorohydrin/Cationic Starch.

Pre-depositing versus mixing powdered activated carbons for gravity-driven membrane systems during treated domestic wastewater filtration: Permeability stabilization and removal performance

The reinforcement mechanism of bacterial cellulose on paper made from woody and non-woody fiber sources