Abstract:The silicon carbide particles were employed as the skeleton material, while the mixture of feldspar and clay in eutectic composition to form the glassy grain-boundary phase serving as the binder to hold the SiC grains together, particulate carbon to be oxidized and generate pores. Slip casting process was investigated and some properties of the porous ceramics were discussed. The isoelectric Zeta potential point of the SiC particles corresponded to the pH value of 5.2, and the pH values of the slurry were controlled between 8 and 12 to provide the perfect stability and fluidity. The increase in the firing temperature decreases the range of the pore size distribution, with the principal pore diameter keeps relatively constant. The neck-bridging structure exists among the SiC grains due to the viscous flow of the grain-boundary phase at high temperatures, which helps to improve the binding behaviour. The oxidation product of SiC reacts with the grain-boundary phase, and leads to the precipitation of needle-like mullite crystals, which gives rise to the abnormal increase in the strength of the porous ceramics.

Fabrication of Porous SiC Ceramics with Laminated Structure by Freeze Casting of Aqueous Slurries

Control of Pore Structure During Freeze Casting of Porous SiC Ceramics by Different Freezing Modes

Fabrication, Structure and Properties of Porous SiC Ceramics with High Porosity and High Strength

Fabrication of Ceramics with Complex Porous Structures by the Impregnate–Freeze‐Casting Process

Porous SiC/SiCN Composite Ceramics Fabricated by Foaming and Reaction Sintering

The controllable microstructure of porous Al2O3 ceramics prepared via a novel freeze casting route

Processing, Microstructures and Mechanical Properties of Aqueous Gelcasted and Solid-State-Sintered Porous Sic Ceramics

Fabrication and Properties of SiC Porous Ceramics by Slip Casting Process

Synthesis of Porous α-Al_2O_3 Ceramics by Freeze-Casting Processing

Pore Architectures And Mechanical Properties Of Porous -Sialon Ceramics Fabricated Via Unidirectional Freeze Casting Based On Camphene-Templating

Fabrication of Porous Alumina Ceramics with Directional Pore Channels Structure by Freeze-Gel Casting Processing

Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

Effect of Solid Content on Pore Structure and Mechanical Properties of Porous Silicon Nitride Ceramics Produced by Freeze Casting

Ultralight Porous SiC with Attracting Strength: Freeze Casting of Polycarbosilane/sicp/camphene-Based Suspensions

Fabrication and Microstructure of Porous SiC Ceramics with Al 2 O 3 and CeO 2 As Sintering Additives

Fabrication Of Gradient Porous Beta-Sialon Ceramics Via A Camphene-Based Freeze Casting Process

Pore Architectures and Mechanical Properties of Porous α-SiAlON Ceramics Fabricated via Unidirectional Freeze Casting Based on Camphene-Templating

Microstructure and Property of Porous SiC Ceramics Prepared by Vacuum Sintering

Microstructure and Mechanical Properties of ZrB2–SiC Porous Ceramic by Camphene-Based Freeze Casting

A new approach for the net-shape fabrication of porous Si3N4 bonded SiC ceramics with high strength

Direct Fabrication Mechanism of Pre-Sintered Si3N4 Ceramic with Ultra-High Porosity by Laser Additive Manufacturing