Abstract:Reprocessing technologies can be divided into wet process using aqueous solution and dry process. The wet process includes solvent extraction ( liquid-liquid extraction), ion exchange, precipitation, etc. The PUREX process which uses TBP as extractant and can recover about 99. 5% of the U and Pu from spent fuel is the only successfully commercialized reprocessing technology nowadays. However, the PUREX process still has some significant drawbacks such as complicated extraction procedures, generation of a great amount of waste and utilization of large scale equipment. In addition, it can not effectively recover the long-lived nuclides such as minor actinides (Np, Am, Cm) and Tc, which will result in a long term radiological effect on the environment. In recent years, many efforts have been devoted to the improvement of the PUREX process and the study of advanced wet reprocessing technologies. Dry process utilizing electro-refining in molten salt, reductive extraction in liquid metal or volatilization of fluorides is attracting wide attention, because it has the advantages of compact equipment, high radiation resistance and critical safety. But relatively low separation factor and corrosion of materials at high temperature are the main problems of the dry process. This article reviews the progress in the chemical separation technologies for nuclear fuel reprocessing abroad. Furthermore, some chemical problems in separation processes are analyzed and discussed.

Application and Improvement of Reciprocating-sieve Plate Extraction Column in Natural Uranium Extraction and Purification Process

RETENTION OF STATIONARY PHASE AND PARTITION EFFICIENCY OF MULTILAYER HELICAL COLUMN ROTATED AROUND ITS HORIZONTAL AXIS

Progresses of study and application on extraction columns

Advances in partitioning of minor actinides and rare earths from high level liquid waster

HYDROXYLAMINE DERIVATIVE IN PUREX PROCESS. VI. STUDY ON THE PARTITION OF URANIUM/NEPTUNIUM AND URANIUM/PLUTONIUM WITH N,N-DIETHYLHYDROXYLAMINE IN THE PURIFICATION CYCLE OF URANIUM CONTACTOR

Advances in Development and Application of Centrifugal Extractors in Nuclear Industry

The Structural Innovative Design of DN400 Experimental Facility with Inversed U-shaped Twin Tower for Uranium Ion Exchange

Ion-exchange induced multiple effects to promote uranium uptake from nonmarine water by micromotors

Progress in Extracting Uranium From Seawater of China

Summary of New Type of Ф1600 High Efficient Uranium Hydrometallurgy Fixed Bed Ion-exchange Device

Extraction of Uranium Nitrate with 30% (v/v) Tributyl Phosphate in Kerosene in an Pilot Annular Pulsed Disc-and-Doughnut Column—Part I: Hydraulic Performance

Extraction of Uranium Nitrate with 30% (v/v) Tributyl Phosphate in Kerosene in a Pilot Annular Pulsed Disc-and-Doughnut Column-Part II: Axial Mixing and Mass Transfer Performance

Research progress in annular centrifugal extract separation technology

Hydrodynamic Performance Study of a Reciprocating Plate Column Dirven by Electro-permanent Magnet Technology

A Study on Energy Saving of Condensate Pump Speed Regulation improvement for CPR1000 Nuclear Power Unit

Achieving Efficient Uranium Extraction by in Situ Ultrasonic Texturization of Commercial Fe Powder

Recent advances of annular centrifugal extractor for hot test of nuclear waste partitioning process

Research and application progress in countercurrent solvent extraction

Progress and Discussion on Chemical Separation Technologies for Nuclear Fuel Reprocessing Developed Abroad

Effect of Sieve Plate Arrangement on Mass Transfer Performance of Pulsed-Sieve-Plate Extraction Column

Development of an Advanced Ion Exchange Process for Reprocessing Spent Nuclear Fuels