Abstract:High-temperature alkali-metal heat pipes are passive heat transfer devices, where the capillary pressure created by the menisci in the wick pumps the condensed fluid back to the evaporator. Thus, the heat pipe heat transfer capacity is limited by the maximum capillary pressure at high heat fluxes. This work presents a two-dimensional heat and mass transfer model for alkali metal heat pipes. In addition to the traditional wall heat conduction model, the model also incorporates gas-liquid flow heat transfer and capillary structure models, enabling the model to simulate both steady-state operation and transient capillary limit processes. The predictions of the model agreed well with experimental data. The predicted critical heat flux temperature has an error of less than 20 & DEG;C and a relative error of 6%. The predicted transient sequences are consistent with the measurements. The model shows that capillary limit is affected by inclination angle, heat flux, and wick structure. For inclinations, the critical heat flux at the capillary limit is linearly related to the inclination angle with the predicted temperature rising 2-10 & DEG;C/s during the early stage of the capillary limit critical heat flux condition. The evaporator temperature oscillates before the capillary limit with positive inclinations. For heat fluxes, increasing the heat flux by 17% increases the temperature increase rate 10 fold with a longer dryout length. The evaporator exhibits hysteresis after the capillary limit due to partial dryout of evaporator. For wick structures, reducing the mesh screen pitch from 80 & mu;m to 15 & mu;m reduces the critical heat flux to 10% of the CHF at 80 & mu;m. This model can accurately predict the heat pipe temperature variations at the capillary limit and can explain the physical mechanisms for the dryout oscillations and recovery hysteresis at the capillary limit. Thus, the measurements and model provide analytical guidelines for designing heat pipe cooling systems.

One-dimensional Analysis of Melting in an External Artery Heat Pipe

A comparative study between two-dimensional and three-dimensional simulation results of melting inside a container

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Can the Numerical Simulations of Melting in a Differentially-Heated Rectangular Cavity Be Rationally Reduced to 2D? A Comparative Study Between 2D and 3D Simulation Results

Investigation on Microheat Pipe Array with Arteries

Analysis on Heat Resistance of the Micro Heat Pipe with Arteries

Numerical Simulation of the Melting of Solid Particles in Thermal Convection with a Modified Immersed Boundary Method

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Numerical Study of the Thermal Performance of a Hydrogen Pulsating Heat Pipe

Mhd Effect on Flow Structures and Heat Transfer Characteristics of Liquid Metal-Gas Annular Flow in A Vertical Pipe

CFD simulation based on film model of high temperature potassium heat pipe at different positions: Horizontal, vertical, and 45° inclined

A study of liquid flow in a flat plate heat pipe under localized heating

Analysis of the flow and heat transfer in the melting process

Transient Multidimensional Analysis of Nonconventional Heat Pipes With Uniform and Nonuniform Heat Distributions

Three-dimensional transient mathematical model to predict the heat transfer rate of a heat pipe

A review of liquid metal high temperature heat pipes: Theoretical model, design, and application

Experimental investigation and analytical prediction of a multi-channel flat heat pipe thermal performance

Numerical modeling of alkali metal heat pipes

Investigation of Thermal Characteristics and Two-Phase Flows of a Star-Shape Thin Heat Pipe

Capillary Limit of a Sodium Screen-Wick Heat Pipe