Abstract:Geopolymers are prepared by alkali solution-activated natural minerals or industrial waste materials, which have been widely used as new sustainable building and construction materials for their excellent thermal and mechanical properties. The thermal and mechanical properties of geopolymers at high temperature have attracted great attention from many researchers. However, there are few systematic works concerning these two issues. Therefore, this work reviewed the thermal and mechanical behaviors of geopolymers at high temperature. Firstly, the thermal properties of geopolymers in terms of mass loss, thermal expansion, and thermal conductivity after high temperature were explained. Secondly, the mechanical properties of residual compressive strength and stress-strain relationship of fly ash geopolymers and metakaolin geopolymers after high temperature were analyzed. Finally, the microstructure and mineralogical characteristics of geopolymers upon heating were interpreted according to the changes of microstructures and compositions. The results show that the thermal properties of geopolymers are superior to cement concrete. The geopolymers possess few mass loss and a low expansion ratio and thermal conductivity at high temperature. The thermal and mechanical properties of the geopolymers are usually closely related to the raw materials and the constituents of the geopolymers. Preparation and testing conditions can affect the mechanical properties of the geopolymers. The stress-strain curves of geopolymer are changed by the composition of geopolymers and the high temperature. The silicon-type fillers not only improve the thermal expansion of the geopolymers but also enhance mechanical properties of the geopolymers. But, they do not contribute to reducing the thermal conductivity. the different raw materials, aluminosilicate precursor and reinforcement materials, result in different geopolymer damage during the heating. However, phase transitions can occur during the process of heating regardless of the raw materials. The additional performance enhancements can be achieved by optimizing the paste formulation, adjusting the inner structure, changing the alkali type, and incorporating reinforcements.

Thermo-mechanical and Microstructural Characterization of Geopolymers with Α -Al 2 O 3 Particle Filler

Thermal-mechanical Properties of Short Carbon Fiber Reinforced Geopolymer Matrix Composites Subjected to Thermal Load

Compositional Dependence of Pore Structure, Strengthand Freezing-Thawing Resistance of Metakaolin-Based Geopolymers

Thermal and Mechanical Properties of Geopolymers Exposed to High Temperature: A Literature Review

The Effect of Various Si/Al, Na/Al Molar Ratios and Free Water on Micromorphology and Macro-Strength of Metakaolin-Based Geopolymer

Nano-scale study on molecular structure, thermal stability, and mechanical properties of geopolymer

Effects of high-temperature heat treatment on the microstructure and mechanical performance of hybrid Cf-SiCf-(Al2O3p) reinforced geopolymer composites

Tunable thermal conductivity of sustainable geopolymers by Si/Al ratio and moisture content: insights from atomistic simulations

Experimental investigation on the mechanical performance and microscopic characterization of desulfurization gypsum-reinforced ternary geopolymer

Thermal and Mechanical Properties of Epoxy Casting Materials Modified by Al2O3 for GIS

Tunable Thermal Conductivity of Sustainable Geopolymers by the Si/Al Ratio and Moisture Content: Insights from Atomistic Simulations

Effect of High Temperature Heat Treatment on Mechanical Property of Cr-Geopolymer Composite

Effect of Water-Soluble Polymers on the Rheology and Microstructure of Polymer-Modified Geopolymer Glass-Ceramics

Microstructure Evolution Mechanism of Geopolymers with Exposure to High-Temperature Environment

Effect of Organic Polymers on Mechanical Property and Toughening Mechanism of Slag Geopolymer Matrix

Physical and High Temperature Properties of Basalt Fiber-Reinforced Geopolymer Foam with Hollow Microspheres

Synthesis of nano-alumina and their effect on structure, mechanical and thermal properties of geopolymer

A Multiscale Investigation of Reaction Kinetics, Phase Formation, and Mechanical Properties of Metakaolin Geopolymers

The Influence of Α-Al2o3 Addition on Microstructure, Mechanical and Formaldehyde Adsorption Properties of Fly Ash-Based Geopolymer Products

Potential improvement in the mechanical performance and thermal resistance of geopolymer with appropriate microplastic incorporation: A sustainable solution for recycling and reusing microplastics

Correlation of Microstructural and Mechanical Properties of Geopolymers Produced from Fly Ash and Slag at Room Temperature