Abstract:Nanoindentation-based fracture toughness measurements of ceramic materials like silicon carbide (SiC) with pyramidal indenters are of significant interest in materials research. A majority of currently used fracture toughness models have been developed for Vickers indenters and are limited to specific crack geometries. The validity of the indentation-cracking method for the fracture toughness measurement of single crystal SiC, the elastic-plastic anisotropy and orientation dependence around the c-axis when indented in the direction is examined using nanoindentation with different pyramidal indenters. The residual impressions are analyzed using scanning electron microscopy to measure the crack lengths and the validity of existing fracture toughness measurement methods and equations is analyzed. A combination of nanoindentation with different pyramidal indenters to produce a wide range of effective strains and finite element simulation is used to extract flow properties of single crystal SiC in the direction. It is observed that there is no orientation dependence around the c-axis when SiC-6H is indented in the direction with a Berkovich indenter, i.e., it is transversely isotropic. It is also found that for a Berkovich indenter, the Jang and Pharr model, which is based on the Lawn model for cone/halfpenny cracks, gives approximately constant values at low loads ( 1 N), the Laugier model gives constant fracture toughness values. Finite element analysis using equivalent cones is used along with measured hardness values to estimate the yield strength, the work hardening exponents and the stress–strain curve for single crystal SiC-6H in the direction.

Hardness and fracture toughness of moissanite

Nanostructured Diamond-Tic Composites with High Fracture Toughness

Hardness And Elastic Moduli Of High Pressure Synthesized Mob2 And Wb2 Compacts

Accurate Comparison of the Fracture Toughness of Ultra-Thick Polycrystalline Diamond Plates by ISO Standard Method

Moissanite (Sic) As Windows And Anvils For High-Pressure Infrared Spectroscopy

Local fracture toughness measurements in polycrystalline cubic zirconia using micro-cantilever bending tests

Hardness and Fracture Toughness of Brittle Materials: A Density Functional Theory Study

Micromechanical characterization of zirconia and silicon nitride ceramics using indentation and scratch methods

Fracture Toughness Evaluation and Plastic Behavior Law of a Single Crystal Silicon Carbide by Nanoindentation

Enhancement Of Fracture Toughness In Nanostructured Diamond-Sic Composites

Micromechanical properties characterization of 4H–SiC single crystal by indentation and scratch methods

Anisotropic Deformation of 4H-Sic Wafers: Insights from Nanoindentation Tests

Moissanite: A Window for High-Pressure Experiments

Fracture Strength and Toughness of Chemical-Vapor-deposited Polycrystalline Diamond Films

Superior Hardness and Stiffness of Diamond Nanoparticles

Thermoelastic and mechanical properties in diamond, c‑BN, c‑SiC, TiO 2 , TiO 1.85 and w‑ZnO

Assessing fracture toughness in sintered Al2O3–ZrO2(3Y)–SiC ceramic composites through indentation technique

Fracture from Knoop Indentation-Induced Flaws in Sintered Silicon Carbide and Hot-Pressed Silicon Nitride

Study of Hardness and Deformation of Brittle Materials with a Density Functional Theory

Young's modulus, fracture strength, and Poisson's ratio of nanocrystalline diamond films

Coherent Interface Migration Toughens Diamond