Thermodynamic analysis and operation strategy optimization of coupled molten salt energy storage system for coal-fired power plant
Bo Li,Yue Cao,Tianyu He,Fengqi Si
DOI: https://doi.org/10.1016/j.applthermaleng.2023.121702
IF: 6.4
2023-10-01
Applied Thermal Engineering
Abstract:The growing use of renewable energy requires greater flexibility than existing thermal power units. A steam-extraction system was developed to adjust the power output during a low-load period. The incorporation of molten-salt energy storage enables the decoupling of the boiler from the turbine, thus enabling the regulation of the output power during low-load operation. And the impact of key parameters on the performance of coal-fired units is analyzed to find the suitable operation parameters for the existing coal-fired power plant. The performance parameters of the system are optimized by a multi-objective grey wolf optimization algorithm, which conducts trade-off optimization between roundtrip efficiency and exergy efficiency to identify the Pareto Front for a certain range of extracted steam mass flow rates, hot-tank temperatures, and split ratios. The typical operating conditions of the combined system were analyzed, and a peak capacity of 64.1 MW and a power change factor of 17.33 % were achieved. The discharging process reduced the heat consumption of the unit, while the peak capacity and heat consumption of the combined system were used as objective functions to optimize the charging process. The peak capacity, power enhancement rate, and net profits of the system improved 1.12, 1.42, and 1.27 times after optimization. Heat consumption and efficiency were reduced by 2.61 % and 3.96 %. The molten-salt thermal storage system achieved a synergistic improvement in the operational flexibility and thermal efficiency of the thermal power system.
energy & fuels,engineering, mechanical,thermodynamics,mechanics