Abstract:Computer-Aided Design (CAD) tools are extensively used throughout all of the steps in a VLSI design flow. The physical design domain is one of the three domains that are conceptually abstracted in representing a VLSI design flow. This research work focuses on three areas in VLSI physical design domain: clock tree design and buffer insertion, interconnect model order reduction and LVS verification. First, an optimal buffer insertion for clock delay and skew minimization algorithm is developed based on the theory that the minimal clock delay can be obtained by equalizing derivatives of a convex function, and the minimal clock skew can be achieved by equalizing delay functions of different source-to-sink paths. Experimental results show that the presented algorithm achieves both minimal delay and skew in real clock tree design. Further, an automatic clock tree design algorithm is developed for realizing the pre-specified clock arrival time requirements that often occur in an IP block based design environment. In this proposed strategy, planar clock routing and buffer insertion are carried out simultaneously to minimize clock delay and skew, and a full waveform simulation is applied to ensure the signal integrity necessary for high-speed VLSI design. Second, an efficient balanced truncation realization algorithm is presented for interconnect model order reduction. This algorithm shows that there is no need to solve the whole Lyapunov equation for controllability and observability grammians before obtaining approximation to their predominant spaces, and a linear order reduction algorithm can be achieved by extending the O(n) Krylov Subspace Oblique Projection method. Finally, a unique LVS methodology is proposed for the verification of a quad-core microprocessor designed with a triple-well 90-nm CMOS technology. Due to the IP reuse, the standard LVS flow is incapable of handling the additional design complexity in verifying the LVS for the chip designed with multiple power domains. This proposed LVS strategy consists of two phases. The first phase involves verifying LVS at the block level as well as the full-chip level. The second phase aims at verifying the integrity of the multi-power-domain power grid. The proposed LVS methodology was successfully verified by real silicon.

The Optimization of Critical Path in Synthesis of SoC

Accelerating RTL Quality Assessment Method Based on CAD Tools

Physical design optimization of MOSFETs for millimeter wave and sub-millimeter wave circuits

VLSI Design Automation Procedure to Optimize SSN Performance

Scheduling to timing optimization for a novel high-level synthesis approach

Global approach for CMOS circuit optimization by transistor resizing

Statistical Timing Analysis and Criticality Computation for Circuits with Post-Silicon Clock Tuning Elements

Reliable Multiprocessor System-on-chip Synthesis

A Combinational Logic Optimization Method for Large-Scale SFQ Circuits

Transistor-Level Optimization Methodology for GRM FPGA Interconnect Circuits.

Slcao: An Effective System Level Communication Architectures Optimization Methodology For System-On-Chips

Algorithms and Methodology in Physical Domain Optimization for High-Performance Vlsi Design

An Efficient Clock Tree Synthesis Method in Physical Design

An Overview of Power Optimization in High Level Synthesis

Performance-driven Fpga Synthesis for Sequential Circuits

SystemC system level synthesis method for heterogeneous MPSoC

Bit-Level Transformation and Optimization for Hardware Synthesis of Algorithmic Descriptions

PowerSyn: A Logic Synthesis Framework with Early Power Optimization

RTLRewriter: Methodologies for Large Models aided RTL Code Optimization

Bit-Level Optimization For High-Level Synthesis And Fpga-Based Acceleration

Multi-objective Optimization Hardening Design for Multiplier Circuit