Abstract:Buffer solution method can maintain the stability of pH in the reaction process, so that the physical and chemical properties of the product are good. Manganese-doped Ni1-x Mnx(OH)2 (x=0.15, 0.18, 0.22, 0.25) was prepared by buffer solution method. X-ray diffraction measurements showed that the samples were mainly composed of β-Ni(OH)2, and some of the Mn-doped samples contain a small amount of impurities. Scanning electron microscopy measurements showed that the crystal particles of Mn-doped samples were small. The specific surface area measurements results showed that the BET surface area of Mn-doped samples were more and the Mn-doped samples had mesoporous structures. Cyclic voltammetry results showed that the difference between the oxidation peak potential and the reduction peak potential of the Mn-doped samples was small. The Mn-doped samples demonstrated better electrochemical performance than commercial β-Ni(OH)2. Constant current charge-discharge results showed that samples with an Mn content of 18 mo1% yielded the highest discharge specific capacity, the best cycle stability with discharge specific capacity of 314.5 mAh g-1 at 800 mA g-1, while the discharge specific capacity of commercial β-Ni(OH)2 was 195 mAh·g-1. It shows that Mn doping can improve the discharge specific capacity of the positive electrode and make the battery have good charge and discharge performance at high current. When the sample with Mn content of 18 mo1% was cycled at 800 mA·g-1 for 30 cycles, the discharge specific capacity did not decrease, while other samples containing Mn and commercial β-Ni(OH)2 showed different degrees of discharge specific capacity. As a positive electrode material, Ni0.82Mn0.18(OH)2 has good cycle stability. A series of experimental results have proved that a proper amount of Mn doping (18 mo1%) can effectively improve the electrochemical performance of nickel electrodes and reduce the cost of cathode materials.

Electrochemical Performance of Multiphase Nickel Hydroxide

Studies of preparation and performance of multiphase nickel hydroxide

Morphology and Electrochemical Performance of Nano-Scale Nickel Hydroxide Prepared by Supersonic Coordination-Precipitation Method

Phase Distribution And Electrochemical Properties Of Al-Substituted Nickel Hydroxides

Facilely Synthesized Α Phase Nickel–cobalt Bimetallic Hydroxides: Tuning the Composition for High Pseudocapacitance

One-Pot Fabrication Of Layered Alpha-Phase Nickel-Cobalt Hydroxides As Advanced Electrode Materials For Pseudocapacitors

Structure and electrochemical performance of α-Ni(OH)2 codoped by Zn2+ and PO4 3-

Effect of Doped Metal Ions on the Electrochemical Performance of Nickel Hydroxide Electrode for Nickel/Metal Hydride Battery

Structure and Electrochemical Performance of Mn-Substituted Nickel Hydroxide

Electrochemical performance of Zn-substituted Ni(OH) 2 for alkaline rechargeable batteries

Study on the Electronic Structure of Doped Nickel Hydroxide Using the DV-Xα Method of Quantum Chemistry

High-Performance Electrode Materials Of Hierarchical Mesoporous Nickel Oxide Ultrathin Nanosheets Derived From Self-Assembled Scroll-Like Alpha-Nickel Hydroxide

Electrochemical Properties of Biphase Ni(OH)[sub 2] Electrodes for Secondary Rechargeable Ni∕MH Batteries

Synthesis and characterization of spherical nonstoichiometric Ni(OH)x (x = 2.03-2.10) as electrode materials

Physical and Electrochemical Characteristics of Nanostructured Nickel Hydroxide Powder

Study of the effects of nanometer ?-Ni(OH) in nickel hydroxide electrodes

Molybdenum Induces the Formation of High-Performance Nickel Hydroxide with Irregular Shape

Preparation and Electrochemical Performance of Manganese- Doped Nickel Hydroxide Cathode Materials

Structure and Electrochemical Performance of Al and Y Co-Doped α-Nickel Hydroxide as a Cathode for a Ni-MH Battery

Evaluation of Nano-Crystal Sized Α-Nickel Hydroxide As an Electrode Material for Alkaline Rechargeable Cells

Electrochemical Properties of Ni(OH)_2 Doped by NiO