Abstract:Rich-nickel layered oxides are regarded as one of the most promising cathode materials for the next generation of high energy lithium-ion batteries due to its high discharge specific capacity. However, the practical application of the materials is limited by poor cyclic stability. In order to solve this severe problem, the spherical precursor Ni0.85Co0.075Mn0.075(OH)2 cathode materials are synthesized through co-precipitation, then Yttrium(Y) is added to synthesize high nickel layered oxides Li(Ni0.85Co0.075Mn0.075)0.98Y0.02O2 during crystallization by solid-state reaction at a certain calcination temperatures under oxygen atmosphere to improve the electrochemical properties of materials in this study. The microstructure, particle morphology and electrochemical properties of the materials are characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), constant current charge and discharge, cyclic voltammetry(CV), respectively. The XRD results show that both two samples are corresponding to the layered α-NaFeO2 structure with R3m space group, while the c/a ratio and the unit cell volume increased with the addition of Yttrium. As the unit cell size increases, the volumes of Li-ion transport pathways also increase, which further promote lithium diffusion rate in the channel and facilitate Li+ intercalation/de-intercalation. And the SEM results demonstrated that both precursor materials were spherical secondary particles formed by the aggregation of primary scale-like particles, and the particle size gradually decreased with the addition of yttrium. The CV determination results show that both materials have two pairs of redox peaks. Still ,the redox peak of the doped material is broader and without the sharpness of the original one. In addition to this, the doped sample exhibits the excellent electrochemical performance with first discharge specific capacity with 193.34 mAh·g-1 and capacity retention of 85.83% after 100 cycles at 0.5C, while the original material LiNi0.85Co0.075Mn0.075O2 has higher first discharge capacity of 195.86 mAh·g-1, and the capacity retention in the 100 cycles of original was only 78.06%. In a word, the results showed that Y-doping could significantly improve the cyclic stability of LiNi0.85Co0.075Mn0.075O2 due to it promoted the diffusion channel of Li+ and inhibited the side reactions between samples and electrolyte. Figure 1

Structure and Electrochemical Performance of Al and Y Co-Doped α-Nickel Hydroxide as a Cathode for a Ni-MH Battery

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Aluminum-doping-based Method for the Improvement of the Cycle Life of Cobalt–nickel Hydroxides for Nickel–zinc Batteries

Synthesis and Electrochemical Characteristics of Li₁.₂(Ni₀.₂Mn₀.₆)ₓ(Co₀.₄Mn₀.₄)y(Ni₀.₄Mn₀.₄)₁₋ₓ₋yO₂ (0 ≤ X + Y ≤ 1) Cathode Materials for Lithium Ion Batteries

IMPROVED HIGH-TEMPERATURE PERFORMANCE OF ADVANCED NICKEL-METAL HYDRIDE BATTERIES THROUGH MATERIALS DEVELOPMENT

Al2O3-Coated, Single Crystal Zr/Y co-Doped High-Ni NCM Cathode Materials for High-Performance Lithium-Ion Batteries

Boosting discharge capability of α-Ni(OH)2 by cobalt doping based on robust spherical structure

Structures and Electrochemical Hydrogen Storage Properties of the As-Spun RE-Mg-Ni-Co-Al-Based AB2-Type Alloys Applied to Ni-MH Battery

Effect of Zr–Y Double Doping and Al2O3 Coating on Properties of Nickel-Rich Monomer LiNi0.6Co0.2Mn0.2O2 Cathode Material for Li-Ion Batteries

Electrochemical Effects of Yttrium(Y) Doping on Rich-Nickel Cathode Materials for Lithium Ion Batteries

The structure and electrochemical performance of spherical Al-substituted ?-Ni(OH) for alkaline rechargeable batteries

Structure and electrochemical performance of α-Ni(OH)2 codoped by Zn2+ and PO4 3-

Yttrium doping stabilizes the structure of Ni3(NO3)2(OH)4 cathodes for application in advanced Ni–Zn batteries

Y-Element Doping Improves Electrochemical Performance and Single-Crystal Structural Stability of Cathode LiNi 0.8 Co 0.1 Mn 0.1 O 2

Achieving High Stability and Rate Performance Using Spherical Nickel-Zinc Layered Double Hydroxide in Alkaline Solution

Nickel-cobalt layered double hydroxide cathode materials with excellent cycle stability for nickel-metal hydride batteries

Enhanced high performance of aluminum/indium Co-doped lithium nickel manganese cobalt oxide for possible batteries application

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

Preparation and Electrochemical Performance of Yttrium-doped Li[Li0.20Mn0.534Ni0.133Co0.133]O2 As Cathode Material for Lithium-Ion Batteries

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Al, B, and F doped LiNi1/3Co1/3Mn1/3O2 as cathode material of lithium-ion batteries