Abstract:Nanometer β-Ni(OH)2, showed by XRD, was prepared by our supersonic coordination–precipitation method, with an average grain size of about 50nm by TEM. Proton diffusion coefficient of nanometer Ni(OH)2 and spherical Ni(OH)2 were 1.93×10−11, and 5.50×10−13cm2/s, respectively, with combination of chronocoulometry and cyclic voltammetry. Charge–discharge test of simulated batteries at 0.2°C showed that addition of 8mass% of our prepared nanometer Ni(OH)2 in nickel hydroxide electrodes led to increases in cathode discharge specific capacity (CDSC) by nearly 10% and the chargeability of the electrode by about 50mAh/g, and a decrease in polarization. Cycle life test of AA-type MH-Ni batteries discovered that effect of nanometer Ni(OH)2 in increasing CDSC was more apparent for the first 100 cycles and not much difference was found after 350 cycles. XAS demonstrated a higher oxidation state of Ni in fully charged nanometer Ni(OH)2 composite electrode (Nano-E) and a lower one in discharged Nano-E, compared with micrometer Ni(OH)2 spherical electrodes (Micro-E). A larger structure distortion was found in Nano-E, offering more vacancies for proton diffusion. Thus conversion between Ni2+ and Ni3+ was promoted during the charge–discharge process, which was assumed to be one explanation of increasing CDSC with the addition of nanometer Ni(OH)2.

Synthesis and characterization of spherical nonstoichiometric Ni(OH)x (x = 2.03-2.10) as electrode materials

Preparation and Electrochemical Performance of Ni(OH)(x) (x=2.01 similar to 2.15) Electrode Material with Core/shell Structure

Nickel oxyhydroxides with various oxidation states prepared by chemical oxidation of spherical β-Ni(OH)2

Physical Characterization, Electrochemical Performance and Storage Stability of Spherical Al-substituted Γ-Niooh

Preparation and Characterization of High-Density Spherical LiNi0.8Co0.2O2

NiO Hollow Spheres with Stable Capacity Retention and Enhanced Rate Capability for Lithium Ion Batteries

Synthesis of nanoscale CoO particles and their effect on the positive electrodes of nickel–metal hydride batteries

Electrochemical Performance of New-type Electrode Material Ni(OH)2.05

Electrochemical Characteristics of Nickel Hydroxide Modified by Electroless Cobalt Coating

Characterization of an Ultrafine Β-Nickel Hydroxide from Supersonic Co-Precipitation Method

Β-Coooh Coated Spherical Β-Niooh As the Positive Electrode Material for Alkaline Zn-NiOOH Battery

Study on Synthesis and Electrochemical Performance of LiNixMn1-xO2(0＜ x ＜ 1) Cathode Material for Lithium-Ion Cell

Synthesis and Characterization of LiNi 0.6 Co X Mn 0.4-X O 2 (x = 0.05, 0.1, 0.15, 0.2, 0.25 and 0.3) with High-Electrochemical Performance for Lithium-Ion Batteries

High-rate discharge properties of nickel hydroxide/carbon composite as positive electrode for Ni/MH batteries

Facile synthesis of spherical x Li 2 MnO 3 ·(1− x )Li(Mn 0.33 Co 0.33 Ni 0.33 )O 2 as cathode materials for lithium-ion batteries with improved electrochemical performance

Study of the effects of nanometer ?-Ni(OH) in nickel hydroxide electrodes

The structure and electrochemical performance of spherical Al-substituted ?-Ni(OH) for alkaline rechargeable batteries

Synthesis of Ni0.8Co0.1Mn0.1(OH)2 precursor and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material for lithium batteries

Ameliorating discharge capability of Co-free flower-like spherical α-Ni(OH)2 by NiS coating

Synthesis and Physicochemical Properties of NiOOH with Different Phase Structures

Synthesis and characterization of abundant Ni-doped LiNixMn2-xO4 (x = 0.1-0.5) powders by spray-drying method